
FOR YOUR SAFETY, CAREFULLY READ ALL INSTRUCTIONS
BEFORE OPERATING YOUR NUTRIBULLET BALANCE.
IMPORTANT SAFEGUARDS &
CAUTIONARY INFORMATION
Electrical Safety
When using any electrical appliance, basic safety precautions should
always be observed, including the following:
• Caution! To avoid risk of electric shock, never immerse the power
cord, plug, or power base of blender in water or other liquids.
• THE USE OF ATTACHMENTS, INCLUDING CANNING JARS, NOT
RECOMMENDED OR SOLD BY THE MANUFACTURER MAY
CAUSE FIRE, ELECTRIC SHOCK, OR INJURY AND VOID THE
WARRANTY.
• This appliance has important markings on the plug blade. The
attachment plug or entire cord set is not suitable for replacement. If
damaged, the appliance should be replaced.
N12S_0901_UG Bluetooth update v5.indd 2 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

• DO NOT USE THE NUTRIBULLET BALANCE WITH ANY TYPE
OF ADAPTOR OR VOLTAGE CONVERTER DEVICE. IT IS
MANUFACTURED IN COMPLIANCE WITH US AND CANADIAN
ELECTRICAL STANDARDS AND PLUG TYPES.
• USE OF ADAPTERS AND CONVERTERS IS CONSIDERED
AN UNAUTHORIZED MODIFICATION OF THE NUTRIBULLET
BALANCE AND AS SUCH WILL VOID THE WARRANTY. USE
OF THE NUTRIBULLET BALANCE IN AREAS WITH DIFFERENT
ELECTRICAL SPECIFICATIONS MAY RESULT IN DAMAGE TO IT.
• UNPLUG THE NUTRIBULLET BALANCE WHEN IT IS NOT IN
USE. MAKE SURE THE POWER BASE IS UNPLUGGED BEFORE
ASSEMBLING, DISASSEMBLING, ADDING ADDITIONAL PARTS,
OR CLEANING.
• Do not pull, twist, or damage the power cord.
• Do not allow the power cord to hang over the side of the counter
or table.
N12S_0901_UG Bluetooth update v5.indd 3 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

• Do not allow the power cord to touch hot surfaces, including stove.
• Periodically inspect the power cord and plug for signs of damage.
Never operate any appliance with a damaged power cord or plug.
If the NutriBullet Balance malfunctions or is dropped, or damaged
in any manner, discontinue use and contact Customer Service for
further assistance.
• At all times, avoid contact with moving parts.
• Keep hands and utensils away from the cutting blade while
chopping or blending food to reduce the risk of severe personal
injury or damage to the device. A scraper may be used, but only
when the blender/food chopper is not running and the NutriBullet
Balance is unplugged.
• NEVER LEAVE THE NUTRIBULLET BALANCE UNATTENDED
WHILE IT IS IN USE.
• CLOSE SUPERVISION IS NECESSARY WHEN USED BY OR NEAR
CHILDREN.
• TO PREVENT OVERHEATING, NEVER ALLOW THE MOTOR
N12S_0901_UG Bluetooth update v5.indd 4 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

TO RUN FOR MORE THAN ONE MINUTE AT A TIME, AS IT
CAN CAUSE PERMANENT DAMAGE TO THE MOTOR. IF THE
MOTOR STOPS WORKING, UNPLUG THE POWER BASE AND
LET IT COOL FOR AN HOUR BEFORE ATTEMPTING TO USE
IT AGAIN. YOUR NUTRIBULLET BALANCE HAS AN INTERNAL
THERMAL BREAKER THAT SHUTS OFF THE UNIT WHEN IT
OVERHEATS. THE POWER BASE WILL RESET WHEN THE UNIT
IS UNPLUGGED AND THE THERMAL BREAKER COOLS DOWN.
• To reduce the risk of injury and leakage, make sure the blade base
is securely screwed onto the cup before placing it on the Power
Base and operating the NutriBullet Balance.
• Do not use NutriBullet Balance outdoors. Do not allow the
NutriBullet Balance to be exposed to inclement weather elements
such as rain or other wet conditions.
• NEVER PUT YOUR HANDS OR UTENSILS NEAR THE MOVING
BLADE and never use your hands or utensils to press the activator
buttons down while the NutriBullet Balance is plugged in.
N12S_0901_UG Bluetooth update v5.indd 5 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

• BLADES ARE SHARP. USE CARE WHILE HANDLING THE
BLADES AND DO NOT TOUCH THE BLADE EDGES TO AVOID
INJURY.
• NEVER INSERT THE BLADE INTO THE POWER BASE WITHOUT
FIRST ATTACHING THE CUP.
• WE RECOMMEND REPLACING YOUR EXTRACTOR
BLADE EVERY 6 MONTHS OR AS NEEDED FOR OPTIMAL
PERFORMANCE. TO ORDER A REPLACEMENT BLADE, SIMPLY
VISIT: WWW.NUTRILIVING.COM
• PERIODICALLY INSPECT ALL NUTRIBULLET BALANCE
COMPONENTS FOR DAMAGE OR WEAR THAT MAY IMPAIR
PROPER FUNCTION. DISCONTINUE USE AND REPLACE CUPS
IF YOU DETECT CRACKING, CRAZING, OR CLOUDINESS OR
DAMAGE TO THE PLASTIC OR ANY ACTUATOR.
• Check gasket to make sure it is completely seated in the cross
blade before each use.
N12S_0901_UG Bluetooth update v5.indd 6 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

• The NutriBullet Balance is not intended for use in microwave
ovens. Do not place the NutriBullet Balance cups, power base or
any accessories in a microwave as this may result in damage to its
various parts.
• To reduce the risk of personal injury or damage to the device, keep
hands and utensils away from the cutting blade.
• Never blend carbonated beverages. Built-up pressure from
released gases can cause the sealed cup to burst, resulting in
possible injury.
• To prevent leakage when creating a recipe, ALWAYS make sure
that the ingredients do not extend above the MAX line.
• DO NOT PUT HOT LIQUIDS OR INGREDIENTS IN ANY
BLENDING VESSEL BEFORE BLENDING. START WITH COOL OR
ROOM TEMPERATURE INGREDIENTS. HEATED INGREDIENTS
CAN CREATE INTERNAL PRESSURE IN A SEALED BLENDING
VESSEL, WHICH MAY ERUPT ON OPENING AND CAUSE
THERMAL INJURY.
N12S_0901_UG Bluetooth update v5.indd 7 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

• CAUTION! Friction from the rotating blade can cause ingredients
to heat and generate internal pressure in the sealed vessel. Do
not continuously operate for more than one minute. If the vessel
is warm to touch, allow it to cool before carefully opening it
pointed away from your body.
• Extract for no longer than 1 minute. If more extraction is needed,
wait 1 minute, then repeat the extraction process in 1 minute
intervals up to three times as needed to achieve the desired
consistency. If more than three 1-minute extractions are needed,
allow the Power Base to cool for 2-3 minutes after the third
extraction before beginning the next round.
• Never permit any blended mixture to sit inside a sealed vessel
without first releasing internal pressure.
• Do not allow blended mixtures to sit for long periods of time in
a sealed container. The sugars in the fruit and vegetables can
ferment, creating gas and causing pressure to build up and
expand in the vessel which can cause ingredients to burst and
spray out when moved or opened.
N12S_0901_UG Bluetooth update v5.indd 8 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

• Never use the NutriBullet Balance to blend ingredients without
adding liquid in as doing so may damage the blade.
• The cyclonic action of your NutriBullet Balance requires the use
of liquids to make NutriBlasts and other nutritious beverages. The
NutriBullet Balance is not intended to be used as an ice crusher,
and not without liquids. To make a delicious cold NutriBlast, we
suggest that you use frozen fruit and chilled liquids. Alternatively,
you may add crushed ice, up to 25% of the total cup volume, with
water or other liquid filled up to the “MAX” line. Do not crush ice or
other hard items without liquid, as such prolonged use over time
may dull or damage the blades. Always inspect your blades before
each use.
• To stop the motor, twist the cup to release it from the lock mode,
and at the same time, press the cup/blade assembly down and wait
for the motor to power down completely.
• Never remove the cup and blade assembly from the power base
until the motor comes to a complete stop. Removing the cup/
blade assembly while the power base is still running may cause
N12S_0901_UG Bluetooth update v5.indd 9 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

WARNING: VENTILATION CAUTION
• Always operate the NutriBullet Balance on a level surface,
leaving unobstructed space beneath and around the power
base to permit proper air circulation. Slots and openings on the
bottom of the NutriBullet Balance are provided for ventilation
to ensure reliable motor operation and to prevent over-heating.
WARNING!
• To prevent fire hazard, power base openings should be free of
dust or lint and never obstructed with flammable materials such
as newspapers, tablecloths, napkins, dish towels, or place mats.
damage to the blade coupling or motor gear.
• The Smart Nutrition Sensor includes a delicately calibrated
scale. Handle with care. If it is dropped or jarred, it may impact
the calibration causing it not to connect or detect the placement
of the cup. If this occurs, please contact customer server for
assistance.
N12S_0901_UG Bluetooth update v5.indd 10 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
WARNING!
• IF YOU ARE TAKING ANY MEDICATION, ESPECIALLY
CHOLESTEROL-LOWERING MEDICATION, BLOOD THINNERS,
BLOOD PRESSURE DRUGS, TRANQUILLIZERS, OR
ANTIDEPRESSANTS, PLEASE CHECK WITH YOUR DOCTOR
BEFORE CONSUMING ANY OF THE NUTRIBLAST RECIPES.
• THE NUTRIBULLET BALANCE HAS A POLARIZED PLUG (ONE
PRONG IS WIDER THAN THE OTHER) TO REDUCE THE RISK
OF ELECTRIC SHOCK. THIS PLUG WILL CORRECTLY FIT IN A
POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT
FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT
FIT, CONTACT A QUALIFIED ELECTRICIAN. DO NOT MODIFY THE
PLUG IN ANY WAY.
N12S_0901_UG Bluetooth update v5.indd 11 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

• THE FOLLOWING LIST OF SEEDS AND PITS CONTAIN
CHEMICALS THAT RELEASE CYANIDE INTO THE BODY
WHEN INGESTED. DO NOT USE THE FOLLOWING SEEDS
AND PITS IN THE NUTRIBULLET BALANCE: APPLE
SEEDS, APRICOT SEEDS, CHERRY PITS, PLUM PITS, AND
PEACH PITS.
Cleaning Safeguards
• RINSE BLADES (AND CUPS) IMMEDIATELY AFTER USE
TO PREVENT DEBRIS FROM DRYING AND STICKING
TO VESSELS — IF NECESSARY, USE A DISH BRUSH TO
LOOSEN ANY DEBRIS.
• HAND WASH ONLY WITH MILD DISH SOAP AND WARM
WATER (NOT HOT).
• DRY IMMEDIATELY.
N12S_0901_UG Bluetooth update v5.indd 12 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

• FOR TOUGH DEBRIS, FILL THE CUP ½ FULL WITH ROOM
TEMPERATURE (NOT HOT), MILD SOAPY WATER. THEN,
SIMPLY TWIST ON THE BLADE, POP IT ON THE BASE
AND GIVE IT A RUN FOR 30-45 SECONDS. THIS WILL
LOOSEN THE STUCK INGREDIENTS, AND WITH A LIGHT
SCRUB AND RINSE IN WARM WATER, YOU’LL BE ALL
DONE.
• DO NOT PUT THE BLADES IN THE DISHWASHER AS
ELEVATED TEMPERATURES CAN DAMAGE GASKETS.
SIMPLY HAND WASH WITH WARM, MILD SOAPY WATER.
• THE NUTRIBULLET BALANCE CUPS CAN BE WASHED
ON THE TOP RACK OF THE DISHWASHER USING THE
NORMAL (NOT SANITIZE) CYCLE. THE NUTRIBULLET
BALANCE CUPS AND BLADES SHOULD NOT BE
IMMERSED IN BOILING WATER FOR ANY REASON AS THIS
WILL WARP THE PLASTIC AND DAMAGE THE GASKET.
N12S_0901_UG Bluetooth update v5.indd 13 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

• WHEN WASHING BLADES, DO NOT ATTEMPT TO REMOVE
THE GASKET RING. SIMPLY HAND WASH THE BLADES IN
WARM, MILD SOAPY WATER. ATTEMPTED REMOVAL OF
THE GASKET MAY PERMANENTLY DAMAGE THE BLADE
CONFIGURATION AND CAUSE LEAKAGE.
CLEANING THE NUTRIBULLET BALANCE
Everyone hates cleaning up, which is just one more reason
the NutriBullet Balance is such a wonderful time saver.
WARNING:
• ALWAYS UNPLUG THE NUTRIBULLET BALANCE WHEN
CLEANING OR ASSEMBLING.
Cleaning the NutriBullet Balance is so easy… simply place
any of the pieces (except for the Power Base, Smart Sensor
N12S_0901_UG Bluetooth update v5.indd 14 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

Scale, and blades) on the top shelf of the dishwasher or
hand wash with warm soapy water and rinse.
WARNING:
DO NOT WASH THE BLADES IN THE DISHWASHER. THE
NUTRIBULLET BALANCE CUPS CAN BE WASHED IN THE
DISHWASHER BUT ONLY ON THE TOP RACK USING THE
NORMAL (NOT SANITIZE) CYCLE. THE NUTRIBULLET
BALANCE CUPS AND BLADES SHOULD NOT BE
IMMERSED IN BOILING WATER FOR ANY REASON AS THIS
WILL WARP THE PLASTIC AND DAMAGE THE GASKETS.
Stubborn Cleanup
If ingredients dry inside the NutriBullet Balance, make your
cleanup a snap by filling the cup about 2/3 full with room
N12S_0901_UG Bluetooth update v5.indd 15 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

temperature soapy water and screw on the Extractor Blade.
Place the cup assembly on the NutriBullet Balance, power base
for about 20-30 seconds. This will loosen the stuck ingredients,
and with a light scrub, you’ll be all done.
CLEANING THE NUTRIBULLET BALANCE POWER
BASE & SCALE
For the most part the power base doesn’t really get dirty, but if you
neglect to twist the blade on to the cup tightly, liquids can leak out
and get into the base and activator buttons. If this happens please
use the following cleaning instructions.
Step 1: The most important thing is to UNPLUG the power base
before cleaning!
Step 2: Make sure the blade is not attached to the power base.
N12S_0901_UG Bluetooth update v5.indd 16 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

Step 3: Remove the Smart Sensor Scale from the power base.
Step 4: Wipe the Smart Sensor Scale with a damp cloth until
clean.
Step 5: Wipe the well in the bottom of the power base with a
damp cloth until clean.
Step 6: Replace the Smart Sensor Scale by lining up the
arrow
on the Disc to the arrow in the well of the power base.
Gently press down until the disc is level.
NEVER SUBMERGE
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
For more how-to information,
visit NutriBulletBalance.com
N12S_0901_UG Bluetooth update v5.indd 17 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

FCC IC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
NOTE: The 1200 watt rating of this appliance was obtained by using the
Colossal Cup with the Blade Holder Assembly and 800g of rice at max speed.
N12S_0901_UG Bluetooth update v5.indd 18 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
• This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
• This equipment should be installed and operated with minimum
distance 20cm between the radiator and your body.
This device complies with Industry Canada license-exempt RSS
standard(s).
Operation is subject to the following two conditions:
• This device may not cause interference, and
• This device must accept any interference, including interference that
may cause undesired operation of the device.
N12S_0901_UG Bluetooth update v5.indd 19 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

22 The Evolution of Blending
24 Let’s Get Started
24 Connecting with Bluetooth® wireless technology
25 Troubleshooting
Using with Multiple Devices, 25
Connecting and Disconnecting Manually, 26
Disconnecting the Balance Blender, 28
29 Start Making Your Recipes
38 Manual Mode
44 Cleaning the NutriBullet Balance Smart Sensor Scale and Well
N12S_0901_UG Bluetooth update v5.indd 21 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

The NutriBullet just got smarter with NutriBullet Balance! Born from a
quest for blending excellence, NutriBullet Balance features Bluetooth®
wireless technology that sends REAL-TIME nutrition data to your smart
device as you blend recipes. View carbs, calories, protein, sugar and more
in real time! This provides tighter control over blends by letting you know
exactly what you’re making as you’re making it. Unlike other blenders, with
NutriBullet Balance nothing is left to chance, you always know exactly
what you’re getting!
Watch recipes come to life and tweak them on the fl y to suit your taste.
No more sugary treats disguised as healthy smoothies or protein shakes
in name only. With NutriBullet Balance the smoothie you envision is the
smoothie you can make, down to the gram, every time.
We hope you’ll enjoy the newest member of the NutriBullet family as much
as we do. Say goodbye to measuring cups, eyeballed amounts and wild
card results...with NutriBullet Balance, the only thing you’ll be eyeballing
is a better YOU!
NutriBulletBalance.com | 23
N12S_0901_UG Bluetooth update v5.indd 23 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

Let’s Get Started!
Download the free NutriBullet Balance® App
Connecting with Bluetooth
®
wireless technology
The NutriBullet Balance Blender uses Bluetooth®
wireless technology to connect to the Balance App
on your smartphone or tablet.
To connect the Balance Blender to your device:
1. Make sure your smart device has Bluetooth® wireless
technology turned on.
Disconnected
Connected
24 | NutriBulletBalance.com
N12S_0901_UG Bluetooth update v5.indd 24 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

2. Open the NutriBullet Balance App.
3. Plug in your NutriBullet Balance Blender; the button’s blue light will
blink three times and go o.
4. The Balance Blender will connect to the App automatically, and the
blue light will come on. See the following section if it does not.
Troubleshooting
Using with Multiple Devices
Your NutriBullet Balance Blender can only connect to one device at a
time. If you are having trouble connecting, make sure the Balance Blender
is not connected to a dierent device. If your Balance Blender is still
connected to a previously used device, quit the NutriBullet Balance App
running on that device. The Balance Blender will disconnect automatically.
*For phone/tablet compatibility, go to makeitperfectly.com/compatibility.
NutriBulletBalance.com | 25
N12S_0901_UG Bluetooth update v5.indd 25 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

Connecting and
Disconnecting Manually
You can connect to or disconnect
from the Balance Blender manually
in the Balance App. Touch the
Balance Blender icon to the right
of the search box to open the
Available Blenders list.
N12S_0901_UG Bluetooth update v5.indd 26 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

The App will display a check mark
next to the Balance Blender it is
currently connected to.
Touch a Balance Blender in the
list to connect to it or disconnect
from it.
NutriBulletBalance.com | 27
N12S_0901_UG Bluetooth update v5.indd 27 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

Disconnecting the
Balance Blender
You can force the Balance
Blender to disconnect from the
device it is connected to by
touching and holding the button
on the blender.
28 | NutriBulletBalance.com
N12S_0901_UG Bluetooth update v5.indd 28 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

Start
Making
Your
Recipes
A. Make sure your
Balance Blender is
connected to the App.
B. In the Search bar,
type in the name of
the recipe or choose
from our recipe
categories to select
your recipe.
A
B
NutriBulletBalance.com | 29
N12S_0901_UG Bluetooth update v5.indd 29 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

Manual Mode
You can use the NutriBullet Balance without using the Balance App.
This is called Manual Mode. This mode is used for simply blending.
PLEASE NOTE: you will not get any nutritional information or data in
Manual Mode.
38 | NutriBulletBalance.com
N12S_0901_UG Bluetooth update v5.indd 38 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

1
Add ingredients
to the Colossal Cup.
2
Add the liquid of
your choice up to
the MAX line. (Liquid is
required! Ingredients
should not exceed the
MAX line!).
To Blend:
NOTE: The NutriBullet
Balance Cup requires room
to properly extract and blend
the ingredients completely.
Exceeding the MAX line may
result in leakage.
MAX —
NutriBulletBalance.com | 39
N12S_0901_UG Bluetooth update v5.indd 39 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

4
Fit the vessel Blade-side down onto the
Power Base, aligning the actuator tabs. Press
down to begin extraction, gently rotating the Cup
clockwise to lock the cup in place. Extract for no
longer than 1 minute. If more extraction is needed,
wait 1 minute, then repeat the extraction process
in 1 minute intervals up to three times as needed
to achieve the desired consistency. If more than
three 1-minute extractions are needed, allow the
Power Base to cool for 2-3 minutes after the third
extraction before beginning the next round.
NOTE: If the unit is not allowed to cool as instructed, a safety
feature triggers that will power off the unit and temporarily
render it non-functioning. To reset this safety feature, simply
unplug the unit for 15 seconds and plug it back in. Unit will
resume normal function.
NutriBulletBalance.com | 41
N12S_0901_UG Bluetooth update v5.indd 41 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

5
To turn o the NutriBullet Balance —
simply twist in the opposite direction
(counter-clockwise) to release the tabs and
stop pressing down on the Cup. Once the
Power Base stops completely, remove the
Cup from the Power Base.
42 | NutriBulletBalance.com
N12S_0901_UG Bluetooth update v5.indd 42 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

CAUTION:
Do not run the Power Base in excess of 1 minute per interval. Do not run the Power Base for
more than three 1-minute intervals without allowing it to cool for 2-3 minutes after the third
extraction. Running the motor for more than 1 minute consecutively in any interval may result
in permanent damage to the Power Base.
Friction from the rotating Blade when extracting can cause ingredients to heat and generate
internal pressure in the sealed vessel. If the vessel is warm to touch, allow to cool before
carefully opening it pointed away from your body.
NutriBulletBalance.com | 43
N12S_0901_UG Bluetooth update v5.indd 43 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

Cleaning the NutriBullet Balance
®
Smart Sensor Scale and Well
For the most part the Power Base doesn’t really get dirty, but if you
neglect to twist the Blade onto the Cup tightly, liquids can leak out
and get into the Base and actuator tabs. If this happens please use the
following cleaning instructions.
Step 1: The most important thing is to UNPLUG the Power Base
before cleaning!
Step 2: Make sure the Blade is not attached to the Power Base.
44 | NutriBulletBalance.com
N12S_0901_UG Bluetooth update v5.indd 44 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

Step 4:
Wipe the Smart
Sensor Scale with a
damp cloth until clean.
NOTE: The Smart Nutrition Sensor is a
delicately calibrated scale. Handle with
care. If it is dropped or jarred it may
damage the calibration causing it not
to connect or detect the placement of
the Cup. If this occurs, please contact
customer service for assistance.
46 | NutriBulletBalance.com
N12S_0901_UG Bluetooth update v5.indd 46 1/10/19 6:44 AM
Downloaded from www.ManualsFile.com manuals search engine

NUTRIBULLET BALANCE
®
is a registered trademark of CAPBRAN HOLDINGS, LLC
Copyright © 2018 CAPBRAN HOLDINGS, LLC
NUTRIBULLET, LLC
Los Angeles, CA 90025
All Rights Reserved. Made in China.
The NutriBullet just got smarter with NutriBullet Balance! Born from a
quest for blending excellence, NutriBullet Balance features Bluetooth®
wireless technology that sends REAL-TIME nutrition data to your smart
device as you blend recipes. View carbs, calories, protein, sugar and
more in real time! This provides tighter control over blends by letting
you know exactly what you’re making as you’re making it. Unlike other
blenders, with NutriBullet Balance nothing is left to chance, you always
know exactly what you’re getting!
N12S_0901_UG Bluetooth update v5.indd 52 1/10/19 6:45 AM
Downloaded from www.ManualsFile.com manuals search engine


















