User guide.
HEAT AND PRESSURE SAFETY
WARNING! DO NOT BLEND
HOT, WARM, CARBONATED, OR
EFFERVESCENT INGREDIENTS.
• Such use may over-pressurize the
nutribullet
®
Cup, causing the Cup
and Motor Base to separate while
operating. This may result in bodily
injury from expelling hot content or
exposed blades.
• Only blend room-temperature or
refrigerated ingredients (21°C/70°F
or cooler).
• Carbonated and eervescent
ingredients (e.g., soda, baking
powder, baking soda, yeast, some
batters, cake mix, dry ice, or
other things that become bubbly)
release gasses that increase
pressure within the Cup when
blending. Some protein powders
include eervescent ingredients.
Always check the ingredients of
all supplements before blending.
Always check all ingredients
before blending.
WARNING! DO NOT BLEND
CONTENTS FOR MORE THAN
ONE MINUTE. DO NOT RUN
CONSECUTIVE BLENDING CYCLES
THAT EXCEED ONE MINUTE TOTAL.
• Blending causes ingredients to heat
up, which builds pressure in the Cup
over time. Continuous blending for
more than one minute may cause
the Cup to separate, exposing the
blade or expelling heated contents
and causing injury.
WARNING! DO NOT LEAVE
BLENDED FOODS IN A SEALED
CUP FOR PROLONGED PERIODS
OF TIME.
• Blended mixtures can spoil and
ferment, increasing pressure when
left inside the Cup. This may cause
the Cup to separate if open from
the Motor Base, which may result
in bodily injury from expelling hot
contents or exposed blades.
• Only access the blended contents
through the Sip and Carry Lid
by carefully opening the Lid
after blending.
Important safeguards.
When operating your nutribullet
®
Portable Blender, remember:
SAFETY COMES FIRST.
Warning! To avoid the risk of serious injury or damage, carefully read all instructions
before operating your nutribullet
®
Portable Blender. Basic safety precautions,
including the following important information, should always be observed when
using any electrical appliance.
If you let anyone else use your nutribullet
®
Portable Blender, ensure they understand
the health and safety information in this User Guide and any additional safety or
usage instructions. Each person using a device should completely read the User
Guide to become familiar with the safe operation of the unit.
CUP CAUTION
• If the Cup is hot or warm to the touch,
the contents may be HEATED and
PRESSURIZED. If this happens, take
these steps:
• LEAVE ALONE, DO NOT OPEN. Leave
the Cup where it is and do not touch
it or allow others to touch it. NEVER
attempt to separate the Cup from the
Motor Base as this can result in
bodily injury.
• Do not blend again.
• Allow the Cup to cool for at least 30
minutes. If still warm, allow for more
cooling time.
• Once cool to the touch, slowly open
the Lid, while pointing away from
your face and body. Pour contents
out into a separate vessel.
CUP SAFETY
Proper Cup use is important to safely
operate your nutribullet
®
Portable
Blender. Using the Cup inconsistent with
these instructions may result in bodily
injury, property damage, or damage to
your unit.
• ALWAYS ensure the Cup is securely
locked on the Motor Base before
blending. The motor will not turn
on unless the Cup is situated in the
locked position.
• ONLY operate the unit with the Lid
cover in place.
• DO NOT exceed the MAX line.
Exceeding the MAX line can result in
leakage or stop page of the blade.
• DO NOT remove the Cup or Lid while
the unit is in operation.
• DO NOT overfill the Cup with ice as
it may stop the blades from turning
resulting in damage to the unit or
injury. Always use sucient amount
of liquid before blending.
• Do not use the Cup if you detect
cracking, cloudiness, or
other damage.
32
Save these instructions!
FOR HOUSEHOLD USE ONLY
• Only order replacement parts from
nutribullet.com or by contacting
Customer Service.
BLADE SAFETY
WARNING! BLADES ARE SHARP!
HANDLE WITH CARE TO AVOID
BODILY INJURY.
• Do not touch the sharp edges of
the blades.
• Do not place hands or fingers near
the blades when attaching the Cup
to the Motor Base.
• Handle with care when washing the
blade by hand.
• Always make sure the power is
o and the charger is unplugged
when assembling, disassembling, or
cleaning the blade or Motor Base.
• Do not store the Motor Base with the
blades exposed. Always attach the
Cup to the Motor Base.
WARNING! NEVER PUT YOUR
HANDS INSIDE THE CUP OR
NEAR THE BLADE WHEN THE UNIT
IS RUNNING.
• Do not remove the Cup or Lid until
the blades have completely stopped.
Blades can still activate when the
Lid is removed. Not following these
instructions may result in bodily
injury, property damage, or damage
to your unit.
BLADE CARE AND CAUTION
WARNING! DISCONTINUE USE IF
THE BLADE IS BENT OR DAMAGED.
• Routinely inspect the blades for
damage, and if detected, contact
Customer Service for blade removal
and replacement.
• Remove all utensils and non-food
items from Cup before operating
as it may result in bodily injury or
damage to the blade and unit.
!
• Do not blend stone fruit in this
appliance unless pits/seeds have
been removed. Hard ingredients
may damage the blade.
• The blades may stop turning if
the Cup is overfilled. If this occurs,
please refer to the Errors section in
this User Guide.
SURROUNDING SAFETY
WARNING! DO NOT USE
YOUR NUTRIBULLET
®
PORTABLE
BLENDER WHILE DRIVING,
OPERATING MACHINERY, CYCLING,
WALKING, OR ENGAGING IN OTHER
ACTIVITIES THAT REQUIRE YOUR
UNDIVIDED ATTENTION.
• Do not expose your nutribullet
®
Portable Blender to extreme
temperatures, as this can cause
damage to the batteries, seals, and
other parts of the device.
• Do not place your nutribullet
®
Portable Blender on uneven or
unstable surfaces.
• Do not dry your device with a hair
dryer, clothes dryer, conventional
oven, or microwave oven. If your
device becomes wet, gently wipe the
exterior with a clean, dry cloth.
• Do not use your device near water or
in wet, rainy, or snowy conditions.
• Do not use your device near an open
flame or other heat source; near
areas of excessive dirt, dust, oil, or
chemicals; or in direct sunlight.
• Do not leave your nutribullet
®
Portable Blender inside your
vehicle, especially in the summer
or winter. Prolonged exposure
to extreme temperatures can
cause the batteries to leak,
rupture, or explode.
GENERAL USE AND SAFETY
WARNING! FAILURE TO FOLLOW
ALL INSTRUCTIONS REGARDING
YOUR NUTRIBULLET
®
PORTABLE
BLENDER MAY RESULT IN SERIOUS
PERSONAL INJURY, DEATH, OR
PROPERTY DAMAGE.
• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory,
or mental capabilities, or lack of
experience and knowledge, unless
they are closely supervised and
instructed concerning use of the
appliance by a person responsible
for their safety. Close supervision
is necessary when any appliance is
used by or near children. Children
should be supervised to ensure that
they do not play with the appliance.
• Periodically inspect your nutribullet
®
Portable Blender components for
damage or wear that may impair
proper functioning or create a
safety hazard.
• Be aware of possible hazards when
charging, using, or storing your
nutribullet
®
Portable Blender.
• Do not use this blender for anything
other its intended use.
• Never operate your nutribullet
®
Portable Blender if the Cup is empty.
• Do not attempt to defeat any safety
interlock mechanisms.
• Do not insert any object other than
the appropriate charger into the
USB-C port. Do not allow dust to
accumulate inside the port.
• Do not crush, drop, or damage
the Motor Base. Do not operate if
the Motor Base is damaged in any
manner. Contact Customer Service
for assistance at 1 (800) 523-5993.
• Use only nutribullet
®
attachments/
accessories specifically designed for
your nutribullet
®
Portable Blender.
Always use genuine nutribullet
®
replacement parts and accessories.
Aftermarket parts are not made to
nutribullet
®
specifications and
may damage your unit or cause
serious injury.
• The use of attachments including
canning jars, is not recommended by
the manufacturer may cause a risk
or injury to persons.
• Do not attempt to clean the Motor
Base by immersing in water or other
cleaning liquids. Only gently wipe
and dry with a clean cloth.
• Only the Cup and Lid are dishwasher
safe on Top Rack without the heat
or sanitize cycle. NEVER PLACE THE
MOTOR BASE IN THE DISHWASHER.
ELECTRICAL SAFETY
WARNING! MODIFICATION,
IMPROPER USE, AND FAILURE
TO FOLLOW INSTRUCTIONS CAN
INCREASE THE RISK OF SERIOUS
PERSONAL INJURY, DEATH, OR
PROPERTY DAMAGE.
• Use only UL-listed USB sources
to charge this device or a Listed/
Certified ITE Power Supply or Listed
Class 2 Power designed for use with
power sources rated 100V AC to
240V AC at 50Hz to 60Hz. The USB
charger must be listed Class 2 power
supply or certified ITE power supply,
rated output 5V 2A MAX. Do not use
unapproved sources.
• To avoid the risk of electrical shock,
fire or bodily injury, DO NOT charge
or handle the unit if it is wet, or in an
area that could get wet, or handle
with wet hands.
• Do not use in wet conditions, or
immerse the cord, plug, or Motor
Base in water or other liquids.
• Do not operate with a damaged
cable, Power Supply Unit/Charger,
or appliance malfunction, or if or if
the Motor Base has been dropped
or damaged in any manner. Contact
Customer Service for assistance at
1 (800) 523-5993.
• Always POWER OFF and UNPLUG
the nutribullet
®
Portable Blender
when it is not in use, and BEFORE
assembling, disassembling,
changing accessories, or cleaning.
• Do not charge your device around
flammable materials, on your bed or
couch, or on top of any type
of paper.
• Only charge your device with the
power cord that came with it. Using
incompatible parts or aftermarket
parts may damage your nutribullet
®
Portable Blender or create safety
hazards that may cause personal
injury or damage.
POWER SUPPLY SAFETY
WARNING! ALWAYS SELECT AND
USE YOUR DEVICE’S APPROPRIATE
AC POWER SUPPLY.
• Failure to take the following
precautions can result in serious
personal injury, death from
electric shock or fire, or damage
to your device.
• Only use a Power Supply Unit
(e.g., charger, charging brick) and
power cord specifically for your
country’s voltage.
• Do not use a wall charger with a
voltage converter device or adapter.
• Do not use non-standard power
sources, such as generators or
inverters. Use only AC power
provided by a standard wall outlet.
• Do not use a rapid charger or higher
wattage charger. Use only AC power
provided by a standard wall outlet or
automobile lighter port. Never have
the unit plugged in the automobile
lighter port when starting your car
to prevent possible power surge and
shorting out of the unit.
• Confirm that your electrical outlet
provides the type of power indicated
for your nutribullet
®
Portable
Blender (in terms of voltage [V] and
frequency [Hz]). If you are unsure of
the type of power supplied to your
home, consult a qualified electrician.
• Do not overload your wall outlet,
extension cord, power strip, or other
electrical receptacles. Confirm that
they are rated to handle the total
current (in amps) drawn by your
device (as indicated on your Power
Supply Unit) and any other devices
using the same circuit.
54
• For the Power Supply Unit where
the AC prongs may be folded for
storage, ensure the prongs are
fully extended before plugging into
an outlet.
• Never use a Power Supply Unit/
Charger that is damaged, has
been dropped, or received a
sharp impact.
• Do not charge in an area of extreme
heat or cold.
• Always unplug the Power Supply
Unit/Charger when not in use.
CABLE AND CORD SAFETY
WARNING! USE ONLY THE
POWER CORD THAT CAME WITH
YOUR NUTRIBULLET
®
PORTABLE
BLENDER TO CHARGE.
• Inspect your power cords and
cables regularly.
• Exposed device cables and cords
pose a potential tripping hazard.
Arrange all cables and cords so that
people and pets are not likely to trip
over or accidentally pull on them as
they move around or walk through
the area.
• Do not wrap or wind the power cord
too tight when storing nor bend or
crease the power cord when using.
• When positioning your device or
Power Supply Unit/Charger,
ensure that the cords are not bent
sharply and that the connectors
are not pushed against a wall or
hard surface.
• Do not allow pets or children to bite
or chew on cables and cords.
• When disconnecting the power
cord, pull on the plug—do not pull on
the cord.
• Do not let the charging cable touch
hot surfaces or any extreme heat
source, or become knotted, tangled,
or frayed.
• Do not grab or carry your device by
the charging cable or cord.
• Do not let the charging cable hang
over the edge of a table or counter.
BATTERY SAFETY
Your nutribullet
®
Portable Blender
contains rechargeable lithium-ion
batteries. The batteries are not
replaceable and must be recycled
or disposed of properly. Opening
and/or repairing or attempting to
replace the batteries to your device
can cause electric shock, device
damage, fire, and personal injury, or
property damage.
• This product contains lithium ion
batteries. Dispose of your Motor
Base properly. Improper disposal
may result in injury, death, or
property damage as a result
of battery fluid leakage, fire,
overheating, or explosion. Lithium
Ion batteries contain elements that
may pose health risks to individuals
if they are allowed to leach into
the groundwater supply. Disposing
of these batteries in standard
household waste may be illegal in
some countries. Please consult your
local jurisdiction for proper disposal.
• Contact your local recycling or
hazardous waste disposal
centers in your area for proper
disposal instructions.
• Do not expose the Motor Base
containing the battery pack to fire
or excessive heat. Exposure to fire
or temperatures above 265°F/130°C
may damage the batteries and
cause an explosion.
• Do not recharge your nutribullet
®
Portable Blender near a fire,
heat source, or in extremely
hot conditions.
• Recommended storage and ambient
charging temperature: 50°F−104°F
(10°C−40°C).
• Do not use your unit in any area with
a potentially explosive atmosphere
(e.g., fueling areas or fuel service
stations, below decks on boats or
other vessels, fuel and/or chemical
transfer and storage facilities, and
areas where flammable chemicals
or particles, such as grain dust or
metal powders have collected in the
air). In such areas, sparks can occur
and cause an explosion or fire.
• Do not use your unit if the Motor
Base is overheated, has an odor,
leaks, is bulging, or changes in color/
shape. Leaks from battery cells can
occur under extreme conditions.
Battery fluid is corrosive and may be
toxic. It can cause burns and may be
harmful or fatal if swallowed. Turn
o immediately, discontinue use,
and contact Customer Service for
assistance at 1 (800) 523-5993.
• Avoid contact with battery fluid. If a
battery leaks:
- Keep the leaked fluid from
touching your skin, eyes, clothes, or
other surfaces. If the battery fluid
contacts your skin, eyes, or clothes,
immediately rinse the aected
area with water and contact your
doctor or other medical providers
as appropriate.
• Do not use your unit in any area with
a potentially explosive atmosphere,
such as a cabinet above your oven
or stove, near a radiator or heater,
or in any area exposed to
direct sunlight.
• Do not incinerate the Motor Base.
The batteries can explode.
!
76
Save these
instructions!
To view these instructions online or in
other languages, visit nutribullet.com.
98
10 What’s included
11 Assembly guide
12 LED light indicator status
12 Charging
13 Settings
14 Errors
16 Using the nutribullet
®
Portable Blender
18 Care and maintenance
18 Replacement parts
19 nutribullet
®
Portable Blender One-Year
Limited Warranty
22 Product registration
Contents.
Thank you for purchasing the nutribullet
®
Portable Blender.
to-go lidmotor base 20oz cup
USB-C
charging cable
Before first use.
CLEAN UNIT:
See Care and Maintenance
section on page 18.
CHARGE UNIT:
Plug the smaller end of the
included USB-C Cable into
the slot right below the Power
button (on the front of the
Motor Base) and the larger
end of the cable into its
power source (plug adapter,
computer, etc.).
• We recommend fully charging
the unit before using it for
the first time. It takes 60-90
minutes to reach a full charge.
Please see LED Status
Light Indicator section on
pages 12-14.
WARNING! Do not charge if
your unit or the USB-C port
is wet to avoid risk of fire or
bodily injury.
Product configurations may vary. To see our full list of nutribullet
®
accessories
please visit nutribullet.com.
20oz cup
blade assembly
measurement markings
alignment marking
LED status light
power button
motor base
USB-C charging slot
locking latch
release button
Assembly guide.What’s included.
1110
USB-C charging Cable
16
20
400
500
MAX
ml
100
200
300
8
4
12
20oz cup
Spout lid with handle
16
20
400
500
MAX
ml
100
200
300
8
4
12
1312
LED light
indicator status.
1
2
3
4
5
6
No power
All LEDs o.
Fully charged
All LEDs light solid blue.
Wake
Press button once to wake
up your blender. When the
ring is solid blue, you are
ready to blend.
Blend mode
Blue LEDs circulate clockwise.
Press the Power button to start
a 20-second cycle.
Sleep
After 2 minutes of inactivity, your
blender will automatically go
into sleep mode. When the ring is o,
the blender is o.
Low power
LED 1 flashes red.
Charging
LEDs blink to solid blue in
clockwise order.
Battery check
Press and hold the Power button
for 2 seconds to check the
battery level remaining.
Charging.
Settings.
The nutribullet
®
Portable Blender’s
indicator has six LED light bars that
appear red or blue according to
the unit’s operational status. See
below for details.
14
WARNING!
Before first use, review
all warnings and caution
statements in the important
safeguards section
(pages 2-7).
ALWAYS make sure
your blender is clean and
charged before use.
Fully charge your blender
before first use. The charging
port is located under the light
indicator of the Motor Base.
(See the assembly section on
page 11 for reference.)
DON’T run your nutribullet
®
Portable Blender when empty.
DON’T microwave any
nutribullet
®
accessories.
DON’T leave your nutribullet
®
Portable Blender unattended
when in use.
DON’T charge your nutribullet
®
Portable Blender if your USB-C
Cable is wet.
DON’T use hot or warm
ingredients in your blending
cup. Heated ingredients can
cause pressure to build up in
the sealed cup that may expel
hot contents upon opening,
potentially causing personal
injury or property damage.
NEVER run the nutribullet
®
Portable Blender for more than
one minute at a time, as it can
cause permanent damage to
the motor. If the motor stops
working, pause activity and
allow the blender to cool. Your
nutribullet
®
Portable Blender
has an internal thermal breaker
that shuts the unit off when it
overheats. Letting the thermal
breaker cool down should allow
it to reset.
ALWAYS inspect your blade.
During the warranty period,
contact Customer Service
before removing the blade
for safety instructions
and replacement.
15
General error
Light ring will flash red.
Troubleshooting:
Make sure your Cup is secured and
aligned properly.
If the blade is blocked, then try the following:
• Add more liquid to the Cup and try
blending again.
• Shake blender or turn upside down to
remove blockage.
• Turn unit o and remove blockage from
blade using a utensil.
Too many blends
Light ring will flash red, alternating
between top and bottom LEDs.
Solution: Pause activity and allow blender
to cool before next use. Don’t exceed 9
blending cycles within 6 minutes.
Overheat
Light ring will turn red.
Solution: Pause activity and allow
blender to cool before next use.
Errors.
1716
4 Twist the Lid back onto the
Cup.
NOTE: Make sure the Lid Latch is
upright in the locked position.
2 Twist o the Lid and add your
ingredients.
WARNING! For best
performance, do not exceed
the MAX line, do not overfill,
and use sufficient liquid
ingredients.
3 Place the nutribullet
®
Portable Blender on a clean,
dry, and level surface.
NOTE: Ensure the Cup is positioned
properly by aligning the two dots
located on the Cup and Motor Base.
1 Clean Blending Cups with
hot, soapy water before use.
NOTE: You can also clean your
blender by adding cold water and
a drop of soap to the Cup and
blending for one cycle.
✓
x
Direction #4
ml
100
200
4
Direction #5
Direction #7
Direction #8
Direction #8
Direction #6
7 Once blending is complete,
flip the latch down to unlock
the Lid Latch.
8 Press the button on the
Lid to open and reveal the
spout. Enjoy!
6 Once your blender is awake,
press the Power button
again to start a 20-second
blend cycle.
If you want to Pulse your
ingredients or stop your
blend cycle early, press the
Power button again to stop.
WARNING! Do not blend
for longer than one minute
to avoid excessive heat
and pressure build-up. For
repeat cycle, carefully open
the container to release any
built-up pressure before
blending again.
5 Wake up your blender by
pressing the Power button
once. Wait about 1 second
for the light animation
to complete.
NOTE: After 2 minutes of inactivity,
your blender will automatically
go into Sleep Mode. This prevents
accidental blends and preserves
battery life.
Using the nutribullet
®
Portable Blender.
Direction #1
Direction #3
Direction #2
1918
Care & maintenance.
STEP 1:
Always make sure the
nutribullet
®
Portable Blender is
turned off after each use.
STEP 2:
Hand-wash the Cup and Lid
with warm, soapy water and
rinse clean:
NOTE: The motor base is NOT
dishwasher safe. However, the Cup
and Lid can be washed in the top rack
of your dishwasher without the heat or
sanitize cycle.
STEP 3:
Gently rinse the blade assembly
and wipe with a damp sponge
or cloth:
NOTE: Never submerge or run the
Motor Base under water.
WARNING! Do not
touch blades! They
are very sharp.
WARNING! Do not blend
hot or warm liquids in the
20oz Cup.
WARNING! Never submerge
the Motor Base into water
or any other liquid.
STEP 4:
Always store your nutribullet
®
Portable Blender in a safe
place, upright with the Cup
attached, so that the blades are
covered and not exposed. Do
not stack any objects on top of
the unit while storing.
Replacement parts.
To order additional parts and
accessories, please visit our
website at nutribullet.com/
shop/accessories or feel free
to contact Customer Service:
1 (800) 523-5993.
nutribullet
®
Portable
Blender one-year
limited warranty.
LIMITED WARRANTY
FOR NUTRIBULLET
®
PORTABLE BLENDER:
The nutribullet
®
Portable
Blender limited warranty
obligations are confined to
the terms set forth below:
Capital Brands Distribution, LLC,
warrants the nutribullet
®
Portable
Blender against defects in
materials and workmanship for a
period of one year from date of
delivery of the product to the
consumer. This limited warranty is
valid only in the country in which
the product is purchased and
comes with the product at no
additional charge, however
shipping and processing fees will
be incurred for returns,
replacements and or refunds.
If a defect exists, and nutribullet
®
Portable Blender is obligated
under this limited warranty, at
its option, Capital Brands
Distribution, LLC will (1) repair
the product at no charge, using
new or refurbished replacement
parts, (2) exchange the product
with a product that is new or that
has been manufactured from
new or serviceable used parts
and is at least functionally
equivalent to the original
product, or (3) refund the
purchase price of the product.
A replacement product
assumes the remaining
warranty of the original
product. A repaired product
has a one-year warranty
from the date of repair.
When a product or part is
exchanged, any replacement
item becomes your property
and the replaced item becomes
Capital Brands Distribution,
LLC ’s property.
When a refund is given,
your product becomes
Capital Brands Distribution,
LLC ’s property.
OBTAINING
WARRANTY SERVICE:
For limited warranty service,
simply call our customer
service department
1 (800) 523-5993 or contact
us via email from our website
at nutribullet.com, simply click
the Customer Service link and
2120
fill out the customer service
form, and we will be glad to
help you. When you contact our
customer service department
you will be asked for your
name, address, telephone
number and to provide proof of
the original purchase (receipt)
containing a description of the
product(s), purchase date, and
the appropriate nutribullet
®
Portable Blender bar code(s).
Before you send your product
for limited warranty service
please make sure to keep a
copy of all relevant documents
for your files (receipt, etc.). It
is always recommended to
purchase product insurance
and tracking services when
sending your product for
service. Remember, shipping
and processing fees will
be incurred and are not
covered by the one-year
limited warranty.
EXCLUSIONS & LIMITATIONS:
This nutribullet
®
Portable
Blender One-Year Limited
Warranty applies only to
nutribullet
®
Portable Blender
products distributed by or for
Capital Brands Distribution,
LLC that can be identified
by the “nutribullet
®
Portable
Blender” trademark, trade
name, logo affixed to it and
bar code. nutribullet
®
Portable
Blender’s One-Year Limited
Warranty does not apply to
any other products that may
appear to be authentic, but
were not distributed or sold by
nutribullet.com.
Normal wear and tear is not
covered by this limited
warranty. This limited warranty
applies to consumer use only,
and is void when the product is
used in a commercial or
institutional setting.
This limited warranty gives you
specific legal rights, and you
may also have other rights
which vary from state to state.
Capital Brands Distribution, LLC
is not liable for any damage to
products not covered by this
warranty (e.g., cups, book,
User Guide).
This limited warranty does
not apply: (a) to damage
caused by accident, abuse,
misuse, or misapplication; (b)
to damage caused by improper
maintenance (including
unauthorized parts service);
(c) to a product or a part
that has been modified in any
way; (d) if any nutribullet
®
Portable Blender bar code or
trademark has been removed or
defaced; and or (e) if the
product has been used with an
adapter/converter.
THIS LIMITED WARRANTY AND
THE REMEDIES SET FORTH
ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER
WARRANTIES, REMEDIES
AND CONDITIONS, WHETHER
ORAL OR WRITTEN, EXPRESS
OR IMPLIED. CAPITAL
BRANDS DISTRIBUTION, LLC
SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT
LIMITATION, WARRANTIES
OF MERCHANTABILITY
AND FITNESS FOR A
PARTICULAR PURPOSE.
IF CAPITAL BRANDS
DISTRIBUTION, LLC CANNOT
LAWFULLY DISCLAIM IMPLIED
WARRANTIES UNDER THIS
LIMITED WARRANTY, ALL SUCH
WARRANTIES, INCLUDING
WARRANTIES OF
MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN
DURATION TO THE DURATION
OF THIS LIMITED WARRANTY.
No nutribullet
®
Portable
Blender reseller, agent, or
employee is authorized to
make any modification to
this warranty.
CAPITAL BRANDS
DISTRIBUTION, LLC IS NOT
RESPONSIBLE FOR DIRECT,
SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES
RESULTING FROM ANY
BREACH OF WARRANTY OR
CONDITION, OR UNDER ANY
OTHER LEGAL THEORY,
INCLUDING BUT NOT LIMITED
TO LOST PROFITS, DOWNTIME,
GOODWILL, DAMAGE TO OR
REPLACEMENT OF EQUIPMENT
AND PROPERTY. CAPITAL
BRANDS DISTRIBUTION, LLC
SPECIFICALLY DOES NOT
REPRESENT THAT IT WILL BE
ABLE TO REPAIR ANY
PRODUCT UNDER THIS
LIMITED WARRANTY.
Some states and provinces
do not allow the exclusion
or limitation of incidental or
consequential damages or
exclusions or limitations on the
duration of implied warranties
or conditions, so the above
limitations or exclusions may
not apply to you. This warranty
gives you specific legal rights,
and you may also have other
rights that vary by state
or province.
22
To find the serial number, check under
the Motor Base of the unit.
If you cannot find the serial number,
call customer service for assistance.
Please visit nutribullet.com/register or
call 1 (800) 523-5993 to register your
new nutribullet
®
Portable Blender.
You will be asked to enter the Serial
Number* of your product, along
with the purchase date and place of
purchase. The information you submit
is for product registration. Failure to
complete product registration does
not diminish your warranty rights.
The registration will enable us to contact
you in the unlikely event of a product
safety notification. By registering
your product, you acknowledge that
you have read and understood the
instructions for use, and warnings set
forth in the accompanying instructions.
12345678910110
Product registration.
12345678910110
*
Capital Brands Distribution, LLC | nutribullet.com | All rights reserved.
nutribullet
®
Portable Blender is the trademark of CapBran Holdings, LLC
registered in the U.S.A. and worldwide.
Illustrations may differ from the actual product. We are constantly striving to improve
our products, therefore the specifications contained herein are subject to change
without notice.
240920_NBPB50100
