Loading ...
Loading ...
Loading ...
SERVICING AND MAINTENANCE 375
4. Pull the bulb straight out from the housing.
5. Reverse the procedure to install the bulb and
cover.
CENTER HIGH MOUNTED STOP LAMP (CHMSL)
WITH CARGO LAMP
See below steps to replace:
1. Remove the two screws holding the housing/
lens to the body as shown.
CHMSL Mounting Screw Locations
2. Separate the connector holding the housing
and wiring harness to the body.
CHMSL Connector Location
3. Turn the desired bulb socket a quarter turn
and remove the socket and bulb from housing.
4. Pull the desired bulb straight from the socket.
Outside Bulbs: Cargo Lamps
Inside Bulb: Center High Mounted Stop
Lamp
5. Reverse the procedure for installation of bulbs
and housing.
CAB TOP CLEARANCE LAMPS — IF EQUIPPED
See below steps to replace:
1. Remove the two screws from the top of the
lamp.
Removing Rear Screw From Clearance Lamp
CAUTION!
Do not contaminate the bulb glass by touching it
with your fingers or by allowing it to contact other
oily surfaces. Shortened bulb life will result.
CAUTION!
Do not contaminate the bulb glass by touching it
with your fingers or by allowing it to contact other
oily surfaces. Shortened bulb life will result.
8
22_DPF_OM_EN_USC_t.book Page 375
Loading ...
Loading ...
Loading ...