Loading ...
Loading ...
Loading ...
25
BEFORE SWITCHING ON
• Before using your appliance, add a teaspoon of bicarbonate of soda to warm water and with a
damp cloth wipe down all parts of the new appliance, then repeat the process with a clean damp
cloth and dry(ensure the appliance is not connected to the power when performing this task).
• Remove all transport tapes and foam protection pieces . Clean the interior with a cloth dampened
in lukewarm soap and water. Wipe with clean water and wipe dry.
• There may be an odour when you first switch on the appliance, it will disappear when the
appliance starts to cool.
• When the appliance has been positioned, adjust the feet to ensure the unit is stable. This is
essential to ensure quiet running and proper door opening / closing.
• Connect to the electrical socket but do not switch the power to the refrigerator on for at least 3
hours. The coolant within the product needs time to settle after it has been transported and put in
to position, failure to do this will affect the cooling performance of your appliance.
• Once the appliance has settled switch on the power, the compressor will begin to work. Locate
the control panel and set the temperature of the fridge compartment to 4°C and the freezer
compartment to -18°C. Close the door.
• You may hear faint gurgling or bubbling sounds when the refrigerant is pumped to the cooling
system and through the coils or tubing at the rear of the appliance.
When the compressor is in operation you may hear a slight whirring sound or pulsating noise. The
thermostat controls the operation of the compressor, and you may hear a slight click as it cycles in
and out (this is normal).
• To save energy, you should minimize the frequency and duration of door opening.
• Do not place anything on your appliance and install the unit in a suitable place so that there is at
least 30cm clearance above the appliance.
• If placing your appliance next to kitchen cabinets,leave10cm between them.
• The rear of the appliance should be at least 7.5cm away from the backwall.
• The appliance must be used in the vertical position and on a flat surface.
• To level the appliance, use the adjustable feet on the appliance.
• Do not place your appliance on a carpeted surface as this will prevent adequate ventilation.
• This appliance should only be placed on a flat, firm surface.
• Choose a dry and well-ventilated space.
• The appliance should be positioned so that the plug is easily accessible.
Loading ...
Loading ...
Loading ...