Loading ...
Loading ...
Loading ...
Care and cleaning of the range.
Painted surfaces include the sides of the
range and the sides of the door trim.
To clean the painted surfaces, use a hot,
damp cloth with a mild detergent suitable for
these surfaces. Use a clean, hot, damp cloth
to remove soap. Dry with a dry, clean cloth.
Do not use steel-wood pads, commercial
oven cleaners, cleaning powders or other
abrasive cleaners. They will damage
the surface.
Painted Surfaces (on some models)
On glass cooktop models, the oven is vented
through an opening at the rear of the
cooktop.
On coil cooktop mode
ls, the oven is vented
through an opening under the right rear
surface unit.
Never cover the opening with aluminum foil
or any other material.
Oven Vent (on coil models)
To clean the outside glass finish, use a glass
cleaner. Rinse and polish with a dry cloth.
Glass Window (on some models)
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the stainless
steel surface.
To inquire about purchasing stainless
steel appliance cleaner or polish, or to find
the location of a dealer or Mabe Canada
Parts Store nearest you, please call our
toll-free number:
National Parts Center 1.80
0.661.1616
www.GEAppliances.ca
Stainless Steel Surfaces (on some models)
BOWL AND COIL ASSEMBLY (on coil models)
In order to do a right assembly of the bowl and
the coil into the cook top you need to insert both
components together as shown in the picture.
Avoid inserting components sparely, this will
cause wrong assemble issues.
Attention (on coil models)
When using the oven is normal to have an increase
of temperature on the cooktop surface, based on
the fact that the release of heat from the oven is
placed on the back right burner/coil of the range.
29
Consumer Support
Troubleshooting Tips
Care and Cleaning
Operating Instructions
Safety Instructions
Loading ...
Loading ...
Loading ...