Loading ...
Loading ...
Loading ...
Using the oven controls.
10
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions
Safety Instructions
TIMER Pad
Touch this pad to select the timer feature.
Then touch the + and – pads to adjust the timer.
TIMER Light
Flashes while in edit mode―you can change
the set time at this point. Glows when the timer
has been activated. Flashes again when the time
has run out until the control is reset.
CLOCK Pad
To set the clock, press this pad twice and
then press the + and – pads. The time of day
will flash in the display when the oven is first
turned on.
Control Graphics for JCBS660 Model.
Oven Control, Clock and Timer Features and Settings
BAKE Pad
Touch this pad to select the bake function.
BAKE Light
Flashes while in edit mode―you can change
the oven temperature at this point. Glows when
the oven is in bake mode.
START/ON Pad
Must be touched to start any cooking or cleaning
function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
The display will show PRE while preheating.
When the oven reaches the selected
temperature, the oven control will beep and
the display will show the oven temperature.
If “F– and a number or letter” flash in the display and the
oven control signals, this indicates a function error code.
If your oven was set for a timed oven operation
and a power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when there
has been a power outage. Reset the clock.
If the function error code appears during the self-cleaning
cycle, check the oven door latch. The latch handle may
have been moved, even if only slightly, from the latched
position. Make sure the latch is moved to the right as far
as it will go.
Touch the OFF pad. Allow the oven to cool for one
hour. Put the oven back into operation. If the function
error code repeats, disconnect the power to the range
and call for service.
START TIME Pad (on some models)
Use along with the COOK TIME or CLEAN pads
to set the oven to start and stop automatically
at a time you set.
START TIME Light
Flashes while in edit mode―you can change the
start time at this point. Glows when the function
has been activated.
COOK TIME Pad (on some models)
Touch this pad and then touch the + or – pads
to set the amount of time you want your food
to cook. The oven will shut off when the cooking
time has run out.
COOK TIMELight
Flashes while in edit mode―you can change the
set time at this point. Glows when the function
has been activated. Flashes again when the time
has run out until the control is reset.
Clock
Horloge
Minuterie
Timer
Display On/Off
TrueTemp
Steam Clean
Start Time
Heure de
Départ
Cook Time
Nettoyage
Vapeur
Automatic Oven
Four Automatique
Temps de
Cuisson
Arrêt
Off
Grill
Broil
on
Départ
Start /
On/Off
On/Off
Time Controls
Hi/Lo
Temp Recall
Oven Controls
Cuire
Bake
Loading ...
Loading ...
Loading ...