User Manual - Page 53

For 2018 RENEGADE.

Loading ...
Loading ...
Loading ...
3. Using the supplied screwdriver (located
under cargo floor in tool kit), remove the
yellow tab.
4. Insert the screwdriver into the release tab
slot to trigger the release tab of the
liftgate.
Closing
Grasp the liftgate pull handle and initiate
lowering the liftgate. Release the handle
when the liftgate reaches self closing posi-
tion.
NOTE:
Before closing the liftgate, make sure to be in
possession of the key because the liftgate
may be locked.
To Lock The Liftgate
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the liftgate, pushing the Keyless
Enter-N-Go Passive Entry lock button lo-
cated to the right of the outside handle re-
lease will lock the vehicle.
NOTE:
The liftgate unlock feature is built into the
electronic liftgate release.
INTERNAL EQUIPMENT
Power Outlet
There are two 12 Volt (13 Amp) power outlets
in this vehicle, one located under the HVAC
controls and one located in the drivers side
rear cargo area. These power outlets can
power mobile phones, electronics and other
low power devices.
This power outlet is located in front of the
gear selector.
This power outlet is located in the drivers
side rear cargo area.
NOTE:
Do not exceed the maximum power of
160 Watts (13 Amps) at 12 Volts. If the
160 Watt (13 Amp) power rating is ex-
ceeded, the fuse protecting the system will
need to be replaced.
Front Power Outlet
Rear Cargo Power Outlet
51
Loading ...
Loading ...
Loading ...