Loading ...
Loading ...
Loading ...
CAUTION!
To avoid causing damage to the rear win-
dow defroster heating filaments do not
affix stickers or other objects to the inside
of the rear glass.
Turning Off The Climate Control System
Push the ON/OFF button.
With the Climate Control system off:
• Air recirculation is on, isolating the passen-
ger compartment from the outside.
• The A/C compressor is off.
• The blower is off.
• The heated rear window can be
activated/deactivated.
NOTE:
The Climate Control unit stores the tempera-
tures set before the system was turned off
and restores them when one of the following
knobs/buttons is pushed:
• A/C
• Recirculation
• Max Defrost
• Blower Increase
• AUTO
To restart the Climate Control system in fully
automatic mode, push the AUTO button.
System Maintenance
In Winter, the Climate Control system must
be turned on at least once a month for ap-
proximately ten minutes.
Have the system inspected at an authorized
dealership before the summer.
NOTE:
This AC system uses R1234yf Refrigerant.
Climate Control Functions
A/C (Air Conditioning)
The Air Conditioning (A/C) button allows the
operator to manually activate or deactivate
the air conditioning system. When the air
conditioning system is turned on, cool dehu-
midified air will flow through the outlets into
the cabin. For improved fuel economy, press
the A/C button to turn off the air conditioning
and manually adjust the blower and airflow
mode settings. Also, make sure to select only
Panel, Bi-Level, or Floor modes.
NOTE:
• If fog or mist appears on the windshield or
side glass, select Defrost mode and in-
crease blower speed if needed.
• If your air conditioning performance seems
lower than expected, check the front of the
A/C condenser (located in front of the ra-
diator), for an accumulation of dirt or in-
sects. Clean with a gentle water spray from
the front of the radiator and through the
condenser.
MAX A/C
MAX A/C sets the control for maximum cool-
ing performance. Press and release to toggle
between MAX A/C and the prior settings. The
button illuminates when MAX A/C is ON.
Pressing blower speed, temperature, recircu-
lation, or mode settings, will cause the MAX
A/C operation to switch to the selected set-
ting and MAX A/C to exit.
41
Loading ...
Loading ...
Loading ...