Loading ...
Loading ...
Loading ...
• The Automatic High Beam Headlamp Con-
trol can be turned on or off using the
Uconnect System. Refer to “Uconnect Set-
tings” in “Multimedia” in your Owner’s
Manual for further information.
• Broken, muddy, or obstructed headlights
and taillights of vehicles in the field of view
will cause headlights to remain on longer
(closer to the vehicle). Also, dirt, film, and
other obstructions on the windshield or
camera lens will cause the system to func-
tion improperly.
When set to AUTO, the system automatically
turns the headlights on or off based on am-
bient light levels.
Parking Lights
From the O (off) position, rotate the headlight
switch to the first detent (parking position) to
turn on the parking lights. The parking light
indicator in the instrument cluster will illu-
minate.
Headlight Delay
This feature provides the safety of headlight
illumination for up to 90 seconds when leav-
ing your vehicle in an unlit area.
The time delay of the headlights is program-
mable between 0, 30, 60 and 90 seconds.
Headlight Delay Activation
To activate the delay feature, place the igni-
tion in the OFF position while the headlights
are still on. Then, turn off the headlights
within two minutes. The delay interval begins
when the headlight switch is turned off from
the “Low beam” position.
If the headlight switch is in AUTO position
and headlights were on before the ignition is
OFF, the delay interval begins automatically.
Headlight Delay Deactivation
The feature is disabled by turning on the
headlights, the parking lights or by placing
the ignition in the RUN position.
If you shut off the lights before the ignition is
turned on, they will turn off in the normal
manner.
NOTE:
The lights must be turned off within two
minutes of placing the ignition in the OFF
position to activate this feature.
Front Fog Lights — If Equipped
The front fog light switch is built into the
headlight switch.
To activate the front fog lights, turn on the
parking lights or the low beam headlights and
push the fog light button on the headlight
switch. To turn off the front fog lights, push
the fog light button on the headlight switch a
second time or turn off the headlight switch.
An indicator light in the instrument cluster
illuminates when the fog lights are turned on.
NOTE:
The fog lights will operate with the low beam
headlights or parking lights on. Selecting the
high beam headlights will turn off the fog
lights.
Cornering Lights
The cornering lights are a feature to improve
visibility at night while turning the vehicle.
When activated, a light incorporated in the
front fog light will illuminate on the side of
the vehicle the steering wheel is rotated or
the turn signal indicator is on. It can be
activated through the Uconnect System.
GETTING TO KNOW YOUR VEHICLE
30
Loading ...
Loading ...
Loading ...