Loading ...
Loading ...
Loading ...
19
f
the underside of the horizontal surface is lower than 400 mm, then
50 mm clearance around the appliance and between the hob
ble materials.
hen unpacking the appliance please check that the following items
n the packaging:
nual
warranty card
elf-adhesive label for amending the gas category on the appliance’s
LPG conversion jets are used).
Cut a hole in the worktop that corresponds with the relevant
hob on the following pages.
o 400 mm between the hob surface, providing that the underside of
the horizontal surface is in line with the outer edge of the hob. I
it must be at least 50 mm away from the outer edges of the hob.
o
surface and any combusti
Unpacking the appliance
W
are contained withi
1 x Baumatic hob
Pan stands
Burner assemblies
Instruction ma
Baumatic
Fixing screws
Clamps
Sealing strip
LPG conversion jets
S
rating plate (required if the
Installing the appliance
o
drawing for your
BGG30 / BGG32
Loading ...
Loading ...
Loading ...