Loading ...
Loading ...
Loading ...
14
position.
The symbol on the control panel, next to the control knob will
he appliance is fitted with a flame failure safety device on each
igned to stop the flow of gas to the burner head in
e event of the flame going out.
aximum position.
o After this 20 second interval, turn the control knob to your
f position.
o In case of power failure, the burners can be lit by carefully using
a match.
o All operation positions must be selected between the maximum and
minimum
o Never select a knob position between the maximum and off
position.
o
indicate which gas burner it operates.
Automatic ignition with flame failure safety device
T
burner, which is des
th
To ignite a burner:
o Press in the control knob of the burner that you wish to light and
turn it anti-clockwise to the m
o If you keep the control knob depressed, the automatic ignition
for the burner will operate.
o You should hold down the control knob for 20 seconds after the
flame on the burner has lit.
required setting between the maximum and minimum setting
symbols.
o To switch the burner off, turn the control knob fully clockwise to
the gas of
Loading ...
Loading ...
Loading ...