Loading ...
Loading ...
Loading ...
Driving
Vehicle features and op‐
tions
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your vehicle, e. g., due
to the selected options or country versions. This
also applies to safety-related functions and sys‐
tems. When using these functions and systems,
the applicable laws and regulations must be
observed.
Start/Stop button, drive-
ready state
Concept
The following ready states can
be attained by pressing the Start/
Stop button:
▷ Radio-ready state on/off.
▷ Ignition on/off.
▷ Activating/deactivating drive-ready state.
To activate drive-ready state, press the brake
pedal.
The drive-ready state cannot be activated as
long as the charging cable, refer to page 219,
is connected.
Switching radio-ready state on/off
The radio-ready state is activated by pressing
the Start/Stop button in the following situa‐
tions:
▷ When the engine is running.
▷ When drive-ready state is activated.
▷ When the engine is switched off automati‐
cally using the Auto Start/Stop function.
Some electronic systems/power consumers re‐
main ready for operation.
Radio-ready state is switched off automatically:
▷ If the driver's or front passenger door is
opened when exiting the vehicle, with
drive-ready state switched off manually.
▷ If the ignition is switched off manually with
the Start/Stop button.
▷ After approx. 8 minutes.
▷ When the vehicle is locked using the central
locking system.
▷ Shortly before the battery is discharged
completely, so that the engine can still be
started.
If the engine is switched off and the ignition is
switched on, the system automatically switches
to the radio-ready state if the lights are
switched off or, if correspondingly equipped,
the daytime running lights are switched on.
Ignition on
Press the Start/Stop button, and do not press on
the brake pedal at the same time.
All vehicle systems are ready for operation.
Most of the indicator/warning lights in the in‐
strument cluster light up for a varied length of
time.
To save battery power when the engine is off,
switch off the ignition and any unnecessary
electronic systems/power consumers.
Ignition off
Press the Start/Stop button again without step‐
ping on the brake.
All indicator lights in the instrument cluster go
out.
To save battery power when the engine is off,
switch off the ignition and any unnecessary
electronic systems/power consumers.
Seite 89
Driving
CONTROLS
89
Online Edition for Part no. 01402983594 - X/17
Loading ...
Loading ...
Loading ...