Loading ...
Loading ...
Loading ...
DSC Dynamic Stability Control is switched on, if
necessary.
Switching off
With the Stop&Go function for Steptronic trans‐
missions: when switching off while stationary,
depress the brake pedal simultaneously.
Press button on the steering wheel.
The displays go out. The stored desired speed is
deleted.
Interrupting manually
Press button on the steering wheel.
With the Stop&Go function for Step‐
tronic transmissions: when interrupting while
stationary, depress the brake pedal simultane‐
ously.
Interrupting automatically
The system is automatically interrupted in the
following situations:
▷ When the driver applies the brakes.
▷ If selector lever position N is set.
▷ Dynamic Traction Control DTC is activated
or DSC Dynamic Stability Control is deacti‐
vated.
▷ If DSC Dynamic Stability Control intervenes.
▷ If the detection range of the camera is im‐
paired, for instance by soiling, heavy pre‐
cipitation or glare effects from the sun.
▷ With the Stop&Go function for Steptronic
transmissions: following a stationary period
of approx. 3 seconds, after the vehicle was
braked to a stop by the system.
Setting the speed
Maintaining/storing the speed
Press or button in the interrupted state.
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
The stored speed is displayed on the
symbol.
DSC Dynamic Stability Control is
switched on, if necessary.
The speed can also be stored as follows:
Press button.
Changing the speed
or button: press until the desired speed
is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the
road is clear.
▷ or button: each time it is pressed to
the point of resistance, the desired speed
increases or decreases by approx.
1 mph/1 km/h.
▷ or button: each time it is pressed
past the resistance point, the desired speed
changes by a maximum of 5 mph/10 km/h.
or button: hold down to repeat the ac‐
tion.
Adjusting distance
Safety information
WARNING
The system does not relieve from per‐
sonal responsibility. Due to the system limits,
braking can be late. There is a risk of accidents
or risk of damage to property. Be aware to the
traffic situation at all times. Adjust the distance
to the traffic and weather conditions and main‐
tain the prescribed safety distance, possibly by
braking.◀
Seite 161
Driving comfort
CONTROLS
161
Online Edition for Part no. 01402983594 - X/17
Loading ...
Loading ...
Loading ...