Loading ...
Loading ...
Loading ...
The upper shoulder strap's anchorage point will
be correct for adult seat occupants of every
build if the seat is correctly adjusted.
Safety information
WARNING
Use of a safety belt to buckle more than
one person will potentially defeat the ability of
the safety belt to serve its protective func‐
tion.There is a risk of injuries or danger to life.
Do not allow more than one person to wear a
single safety belt. Infants and children are not
allowed on an occupant's lap, but must be
transported and secured in designated child re‐
straint systems.◀
WARNING
The efficacy of safety gear, including
safety belts, can be limited or lost when safety
belts are fastened incorrectly. An incorrectly
fastened safety belt can cause additional inju‐
ries, for instance in the event of an accident or
during braking and evasive maneuvers. There is
a risk of injuries or danger to life. Make sure
that all occupants are wearing safety belts cor‐
rectly.◀
WARNING
The efficacy of safety gear, including
safety belts, may not be fully functional or fail in
the following situations:
▷ The safety belts or safety belt buckles are
damaged, soiled, or changed in any other
way.
▷ Belt tensioners or belt retractors were
modified.
Safety belts can be imperceptibly damaged in
the event of an accident. There is a risk of inju‐
ries or danger to life. Do not modify safety
belts, safety belt buckles, belt tensioners, belt
retractors or belt anchors and keep them clean.
Have the safety belts checked after an accident
at the dealer’s service center or another quali‐
fied service center or repair shop.◀
Correct use of safety belts
▷ Wear the safety belt twist-free and tight to
your body over your lap and shoulders.
▷ Wear the safety belt deep on your hips over
your lap. The safety belt may not press on
your stomach.
▷ Do not rub the safety belt against sharp
edges, or guide it or jam it in across hard or
fragile objects.
▷ Avoid thick clothing.
▷ Re-tighten the safety belt frequently up‐
ward around your upper body.
Buckling the safety belt
1.
Slowly guide the safety belt out of the
holder when fastening it.
2. Insert the tongue plate into the safety belt
buckle. The safety belt buckle must engage
audibly.
Unbuckling the safety belt
1.
Hold the safety belt firmly.
2. Press the red button in the belt buckle.
3. Guide the safety belt back into its roll-up
mechanism.
Seite 77
Settings
CONTROLS
77
Online Edition for Part no. 01402983594 - X/17
Loading ...
Loading ...
Loading ...