Loading ...
Loading ...
Loading ...
Manual Transaxle Operation
1
3
5
2
4
R
This is your shift pattern.
The clutch must be fully
pressed in when shifting a
manual transaxle to
ensure the transaxle is
fully in gear.
Here's how
to
operate your transaxle:
FIRST
(1):
Press the clutch pedal and shift into
FIRST
(1).
Then, slowly let up on the clutch pedal as
you press the accelerator pedal.
You can shift into FIRST
(1)
when you are going less
stop and it is hard to shift into FIRST
(I),
put the
shift lever into NEUTRAL and let up on the clutch. Press
the clutch pedal back down. Then shift into
FIRST
(1).
+hot
9fl
mnh
(99
bmIh\.
!f
\In11
hqxm
rrnmn
+n
CJ
t-nmnlntn
LIIUL
LV
lllpll
\VL
1\11111~j
yuu
llLlSU
"WIIIU
L"
u
"Wlllyl-I"
SECOND
(2):
Press the clutch pedal as you let up
Then, slowly let up
on
the clutch pedal as you press the
accelerator pedal.
Gr:
the
acceIeratGr
pedzl
2nd
shift
Intc
SECOND
(2).
THIRD
(3),
FOURTH
(4),
and FIFTH
(5):
Shift into
THIRD
(3),
FOURTH
(4)
and FIFTH
(5)
the same way
you do for SECOND
(2).
Slowly let up on the clutch
pedal as you press the accelerator pedal.
To stop, let up on the accelerator pedal and press the
brake pedal. Just before the vehicle
stops,
press
the clutch pedal and the brake pedal, and shift to
NEUTRAL.
NEUTRAL: Use this position when you start or idle
your engine.
REVERSE
(R):
To back
up,
press down the clutch
pedal and lift up on the ring on the shift lever to shift into
REVERSE
(R).
Let up on the clutch pedal slowly
while pressing the accelerator pedal.
Notice:
Shift into REVERSE (R) only after your
vehicle
is
stopped. Shifting into REVERSE
(R)
while
your vehicle
is
moving could damage your
transaxle. The repairs would not be covered by your
. . .-
.-
a..
warrarlty.
Also, use REVERSE
(R),
along with the parking brake,
for parking your vehicle.
Once the shift lever is in REVERSE
(R),
the ignition can
be turned to OFF and the key removed.
2-25
Loading ...
Loading ...
Loading ...