Loading ...
Loading ...
Loading ...
Securing a Child Restraint Designed
for
the LATCH System
1.
Find the anchors for the seating position you want
to use, where the bottom of the seatback meets the
back of the seat cushion.
2.
Put the child restraint on the seat.
3.
Attach the anchor points on the child restraint to the
anchors in the vehicle. The child restraint
instructions will show you how.
4.
If
the child restraint is forward-facing, attach the top
strap to the top strap anchor. See
Top Strap on
page
1-41.
Tighten the top strap according to
the child restraint instructions.
5.
Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.
Securing
a
Child Restraint in a Rear
Outside Seat Position
If
your child restraint is equipped with the LATCH
system, see
Lower Anchorages and Top Tethers for
Children (LATCH System) on page 1-43.
You’ll be using the lap-shoulder belt. See the earlier
part about the top strap if the child restraint has one. Be
sure to follow the instructions that came with the child
restraint. Secure the child in the child restraint when and
as the instructions say.
1.
Put the restraint on the seat.
2.
Pick up the latch plate, and run the lap and shoulder
portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
wi!!
show
you
how.
1
-45
Loading ...
Loading ...
Loading ...