Loading ...
Loading ...
Loading ...
<
SCAN
>
:
Press and hold either arrow for more
than two seconds until you hear a beep and SCAN
appears on the display. The tape will go to the next
selection, play for a few seconds, then go on to the next
selection. Press this button again to stop scanning.
BAND: Press this button
to
listen to the radio when a
cassette tape is playing. The tape will stop but remain in
the player.
TP
CD
(TAPE): Press this button to play a cassette
tape or a CD when listening to the radio. Press TP CD
to switch between the tape and compact disc
if
both
are loaded. The inactive tape or CD will remain safely
inside the radio for future listening. The display will
show the TAPE and CD symbols.
A
(Eject): Press this button, located next to the
cassette tape slot, to eject
a
tape. Eject may be
activated with either the ignition or radio
off.
Cassettes
may be loaded with the radio and ignition
off
if
this
button is pressed first.
Cassette Tape Messages
If
an error occurs while trying to play a cassette tape,
it
could be for one of the following reasons:
TIGHT TAPE: When this message is displayed, the
tape is tight and the player can’t turn the tape hubs.
Remove the tape. Hold the tape with the open end down
and try to turn the right hub counterclockwise with a
pencil. Turn the tape over and repeat. If the hubs do not
turn easily, your tape may be damaged and should
not be used in the player. Try a new tape to make sure
your player is working properly.
BROKEN TAPE:
If
this message is displayed, the tape
is broken. Try a new tape.
WRAPPED: When this message is displayed, the tape
is wrapped around the tape head. Attempt to get the
cassette out. Try a new tape.
CLEAN PLAYR (Clean Player): This message may
also appear on the radio display to indicate that
the cassette tape player needs to be cleaned. It will still
play tapes, but you should clean it as soon
as
possible
to prevent damage to the tapes and player. For
additional information see
Care
of
Your Cassette Tape
Player on page
3-65.
If
any error occurs repeatedly or
if
an error can’t be
corrected, contact your dealer.
If
your radio displays an
error message, write it down and provide it to your
dealer when reporting the problem.
3-62
Loading ...
Loading ...
Loading ...