Loading ...
Loading ...
Loading ...
Flash-to-Pass Feature
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want
to
pass.
To
use it, pull the turn signaVmultifunction lever toward
you until the high-beam headlamps come on, then
release the lever to turn them
off.
Windshield
Wipers
Use this lever located on the right side of the steering
wheel
to
operate the windshield wipers.
OFF:
Move the lever to
OFF
to turn off the windshield
wipers.
INT
(Intermittent): Move the lever to INT
to
choose a
delayed wiping cycle. Turn the INT ADJ band down
for a longer delay or up for a shorter delay. The further
the INT ADJ band is turned upward, the shorter the
delay will be and the further the INT ADJ band is turned
downward, the longer the delay will be. The wiper
speed can only be adjusted when the lever is in the INT
position. Use this position for light rain or snow.
LO
(Low
Speed): Move the lever up
to
the first setting
past INT, for steady wiping at low speed.
HI
(High Speed): Move the lever up
to
the second
setting past INT, for steady wiping at high speed.
MIST:
Move the lever all the way down to MIST for a
single wiping cycle. Hold it there until the windshield
wipers start; then let go. The windshield wipers will stop
after one wipe. If you want more wipes, hold the
band on mist longer.
Remember that damaged wiper blades may prevent you
damage, be sure
to
clear ice and snow from the wiper
blades before using them. If they’re frozen to the
windshield, carefully loosen or thaw them.
If
your blades
do become damaged, get new blades or blade inserts.
Heavy
snow
or
Ice
can
overload
your
wiper
motor-
A
circuit breaker will stop the motor until it cools. Clear
away snow or ice
to
prevent an overload.
t---
-,-:,,
...
-
11
---..-.L
L-
-I.-:.,-
--&-I.,
T,
-.,-:A
IIUIII
~GGII
~y
VVGII
GI
wuy~
I
LW
UIIVC; aalC;;ly.
I
u
avulu
3-9
Loading ...
Loading ...
Loading ...