Loading ...
Loading ...
Loading ...
28 Air Conditioner
Operating Instructions
Programming : Setting Sleep Reservation(Wired Remote Controller)
Press button to enter the Programming mode.
Ex) Setting Sleep Reservation time as '3'.
1
Repeat pressing button to enter the SLEEP reservation setting mode.
( segment flashing)
2
Press button to adjust reservation time.
The SLEEP reservation time is from 1 to 7 hours.
3
Press button to finish setting.
Whenever reservation is done.
4
Press button to exit.
❈ After setup, it automatically gets out of setup mode if there is no button input for
60 seconds.
❈ When exiting without pressing set button, the manipulated value is not reflected.
- If reservation is setup, 'sleep' indication shows up at the lower part of LCD
screen.
5
If finishing sleep reservation setup, air-conditioner product operates sleep drive and
stops after the time that is set.
6
Sleep reservation is the function of air-conditioner to run and stop after certain period of time at sleep
mode before sleep. When connected to a ventilation product and set the sleep reservation, when it
goes to the sleep mode, after the set time has elapsed.
Please reserve proper time at sleeping. (Too much air-cooling is not good for your health.)
• Because it automatically adjusts desired temperature for comfortable air-cooling at sleep drive,
there could be difference between remote controller's desired temperature and air-conditioner
body's desired temperature.
• Sleep reservation operates as off reservation for the product whose temperature adjustment isn't
controlled by unit of 0.5°C.
CAUTION
Loading ...
Loading ...
Loading ...