Loading ...
Loading ...
Loading ...
Owner's Manual 23
ENGLISH
Operating Instructions
Repeat pressing button until icon flash.
1
Press button to select active vane : 1 / 2 / 3 / 4 / All / Standard
Select Vane number using buttons.
❈ Vane number : No. 1, 2., 3, 4, all, or standard
- Selected vane is in operation.
- Please verify the operating vane.
- To set the angle of all the vanes, select 'all'.
- To set as the factory default settings, select 'standard'.
2
Select wind angle using button, and press button.
- The boundary of wind angle settings can be changed to 5 levels or 6 levels
according to the product.
- When selecting 'standard' for Vane number, the wind angle does not move.
3
Set the wind angles for the remaining vanes as the same as above.
❈ There are products with vanes with no. 1 and no. 2 only according to the product
types.
4
Press button to exit.
❈ After setup, it automatically gets out of setup mode if there is no button
input for 60 seconds.
❈ When exiting without pressing set button, the manipulated value is not reflected.
5
Press button to complete and active the setting process.
(Airflow direction function will be released whenever setting vane angle)
6
Press button to exit or system will automatically release without any
input after 25 seconds.
7
This function is to adjust angle at which airflow is blow out.
Function setting : Vane Angle Control
Loading ...
Loading ...
Loading ...