Loading ...
Loading ...
Loading ...
Engine servicing
4-10
4-10
(1) SCREWS
(2) THROTTLE DRUM COVER
Disconnect the ECM 32P (Black) connector.
Loosen the insulator band screw, then remove the throttle
body.
Be careful to not pull connector from throttle body, pull
up fixation handle.
Remove the screws and throttle drum cover.
(1) 32P (BLACK) CONNECTOR
(2) BAND SCREW
(3) THROTTLE BODY
Throttle Body
Removal
Remove the rear fender.
Remove the fuel tank/injector as an assembly (page 4-6).
Loosen the connecting tube band screw.
Remove the silencer mounting bolt.
Remove the air cleaner housing mounting nuts and bolt.
Pull the air cleaner housing backward being careful not to
damage the wire harness.
Disconnect the crankcase breather hose from the housing
joint.
(1) BOLTS/NUTS
(2) AIR CLEANER HOUSING
Removal/Installation
Do not remove the injector from the injector holder.
Replace the injector and holder as an assembly.
Always replace the O-ring when the fuel injector assembly
is removed from the cylinder head.
(1) INJECTOR
(2) NEW O-RING
2
1
2
1
3
2
1
2
1 1
1
Loading ...
Loading ...
Loading ...