Loading ...
Loading ...
Loading ...
Service and maintenance
3-12
3-12
.
Remove the bolts/nuts, washers and driven sprocket.
Installation is in the reverse order of removal.
Hold the bolts and tighten the nuts to the specified torque.
Torque:
3E:
4E:
Adjust the drive chain slack (page 3-11).
Driven Sprocket Replacement
Remove the rear wheel (page 5-15).
Remove the bolts/nuts, washers and driven sprocket.
Installation is in the reverse order of removal.
Hold the bolts and tighten the nuts to the specified torque.
Torque:
3E: 24 - 30 N•m (2.4 - 3.0 kgf•m, 17.7 - 22.1 lbf•ft)
4E: 30 - 35 N•m (3.0 - 3.5 kgf•m, 22.1 - 25.8 lbf•ft)
A
(1) BOLTS/NUT
(2) DRIVEN SPROCKET
(1) BOLTS/NUT
(2) DRIVEN SPROCKET
Install the drive sprocket onto the countershaft as shown.
Install the spring washer and bolt, then tighten the bolt to
the specified torque.
Torque: 31 N•m (3.2 kgf•m, 23 lbf•ft)
Install the drive sprocket onto the countershaft as shown.
Install the spring washer and bolt, then tighten the bolt to
the specified torque.
Torque: 31 N•m (3.2 kgf•m, 23 lbf•ft)
(1) DRIVE SPROCKET
(2) SPRING WASHER
(3) BOLT
(1) DRIVE SPROCKET
(2) SPRING WASHER
(3) BOLT
Drive/Driven Sprockets
Drive Sprocket Replacement
Remove the drive sprocket cover.
Loosen the drive chain fully.
Remove the bolt, spring washer and drive sprocket.
Drive/Driven Sprockets
Drive Sprocket Replacement
Remove the drive sprocket cover.
Loosen the drive chain fully.
Remove the bolt, spring washer and drive sprocket.
(1) BOLT
(2) SPRING WASHER
(3) DRIVE SPROCKET
(1) BOLT
(2) SPRING WASHER
(3) DRIVE SPROCKET
3
2
1
3
2
1
2
1
Loading ...
Loading ...
Loading ...