Loading ...
Loading ...
Loading ...
Qty.Description
2Leveling Feet1
Visually inspect unit
1. Remove any packing material from unit.
2. Examine the unit to ensure that the assembly is correct and complete.
Cybex GO Setup
Prerequisites:
• Coax cable with TV signal
• Netpulse Gateway installed and running, providing the connection via:
• Wired (Ethernet) – Ethernet cable is connected to the Cybex equipment through a network switch
to the Gateway
• Wireless – Gateway has been installed in the facility using a unique wireless access point. Cybex
GO Monitor will not connect to any other routers in the area.
• Power to the Cybex Equipment.
1. Install 6' coax cable to the coax cable connector in base of unit.
Qty.Description
1Ethernet Cable1
16’ Coax Cable2
2. For wired networks, Install ethernet cable with ethernet coupler in base of unit.
Page 27 of 76
Cybex 770C/770R Cycle Part Number LT-24919-4 D
Loading ...
Loading ...
Loading ...