Loading ...
Loading ...
Loading ...
95
FILTER MAINTENANCE
Regularly check the air inlets to ensure that they are free from dust and debris. Simply wiping the inlets with a soft cloth
should be sufficient to remove dust and debris.
If the air inlets get clogged, further cleaning or a filter change might be required.
If required for high usage environments, a Dyson filter change kit provides everything needed to change your units
HEPA filter on site. Contact the Dyson Helpline on the number on the back cover of this manual for more information.
Filter cleaning or replacement for your hand dryer can be carried out by carefully following the instructions given in the
filter change kit. If in any doubt, consult a qualified electrician or contact the Dyson Helpline for support.
SERVICING
If your hand dryer needs servicing, please call the Dyson Helpline.
Also visit the website at www.dysonairblade.ca
DISPOSAL INFORMATION
Please dispose of this product responsibly and recycle where possible.
CONFORMITY STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation, notwithstanding use by the general public in commercial, business and industrial environments. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
PLEASE REGISTER AS A DYSON AIRBLADE V HAND DRYER OWNER
To help us ensure you receive prompt and efficient service, please register your unit at www.dysonairblade.ca
This will register your warranty, confirm ownership of your Dyson unit in the event of an insurance loss, and enable us to
contact you if necessary.
You will need your serial number, which is on the rating plate behind the grille on the side of the unit, on a registration
sheet in the box and also on an information sticker on the front of the unit when it is unpacked.
Please ensure all instructions and guidance in this operating manual and the installation guide are adhered to or your
warranty may be invalidated.
YOUR WARRANTY
Terms and Conditions of the Dyson 5 year warranty.
If you have registered your unit online, your warranty will start from the date of purchase. Please retain your proof of
purchase. If you do not have your proof of purchase, your warranty will start 90 days after the date of manufacture,
according to Dyson’s records.
This warranty will be void if the unit is installed and used in a country outside the one in which it was sold.
WHAT IS COVERED
5 YEAR WARRANTY
All factory parts of your Dyson hand dryer are warrantied against original defects in materials and workmanship
when used in accordance with the owner’s manual and installation guide for a period of 5 years from the start of your
warranty. Please call the Dyson helpline for more information.
Where Dyson determines that the main body assembly needs replacement, Dyson will send a replacement to be fitted
by the customer on site. The customer will need to return any defective parts to Dyson using the pre-paid postage box
provided.
Any replaced parts must be returned to Dyson or an administration fee will be levied.
Where a filter change is required, Dyson will provide a filter change kit to be installed on site by the customer.
Any parts which are returned and replaced by Dyson will become the property of Dyson.
The replacement of any part of your unit under warranty will not extend the period of warranty.
The warranty provides benefits which are additional to and do not affect any statutory rights you may have as a
consumer.
WHAT IS NOT COVERED
Dyson does not warranty the repair or replacement of a unit as a result of:
Accidental damage, faults caused by negligent use or care, unintentional or deliberate misuse, neglect, vandalism,
careless operation or handling of the unit which is not in accordance with the Dyson operating manual.
Use of parts not assembled or installed in accordance with the instructions of Dyson.
Use of parts and accessories which are not genuine Dyson components.
Faulty installation, or installation that does not precisely follow the installation instructions supplied by Dyson (except
where installed by Dyson).
Repairs or alterations carried out other than in accordance with instructions by Dyson.
Damage from external sources such as transit, weather, electrical outages or power surges.
Normal wear and tear (e.g. fuse).
Damage caused by cleaning which is not in line with the instructions in this manual: for example, cleaning with
chemicals or products listed as harmful to the unit.
Damage caused by water ingress due to cleaning or treatment prohibited in this manual.
Dyson shall not be liable for any electrical, flooding or structural damage or any loss of business or revenue which
occurs as a result of a product failure.
If you are in any doubt as to what is covered by your warranty, please contact Dyson (details on the back cover).
ABOUT YOUR PRIVACY
Your information will be held by Dyson Canada Limited and its agents for promotional, marketing and servicing
purposes.
If your details change, if you change your mind about any of your marketing preferences or if you have any queries
about how we use your information, please contact Dyson Limited or Dyson Canada Limited.
For more information on how we protect your privacy, please see our privacy policy on the Dyson website.
CAFR
SOINS À APPORTER À VOTRE SÈCHE-MAINS
COMMENT L’UTILISER
Placez vos mains dans l’ouverture du sèche-mains et il se met en marche automatiquement, gérant des lames d’air
qui sont projees sur vos mains pour éliminer toute trace deau.
Pour le meilleur temps de séchage:
1. Gardez les mains droites et parallèles à la surface de l’appareil à environ 5mm de la source des lamelles d’air, en
passant les mains dans le flux d’air des poignets au bout des doigts.
2. Déplacez les mains lentement dans le flux d’air, à une vitesse constante d’environ 2,5secondes pour chaque côté de
main, en faisant alterner le devant et l’arrière des mains.
3. Gardez les mains droites, en réduisant l’espace entre vos doigts et en rentrant le pouce pour que toute la main passe
dans le flux d’air.
Loading ...
Loading ...
Loading ...