Loading ...
Loading ...
Loading ...
94
Any replaced parts must be returned to Dyson or an administration fee will be levied.
Where a filter change is required, Dyson will provide a filter change kit to be installed on site by the customer.
• Any parts which are returned and replaced by Dyson will become the property of Dyson.
• The replacement of any part of your unit under warranty will not extend the period of warranty.
• The warranty provides benefits which are additional to and do not affect any statutory rights you may have
as a consumer.
WHAT IS NOT COVERED
Dyson does not warranty the repair or replacement of a unit as a result of:
• Accidental damage, faults caused by negligent use or care, unintentional or deliberate misuse, neglect, vandalism,
careless operation or handling of the unit which is not in accordance with the Dyson operating manual.
• Use of parts not assembled or installed in accordance with the instructions of Dyson.
• Use of parts and accessories which are not genuine Dyson components.
• Faulty installation, or installation that does not precisely follow the installation instructions supplied by Dyson
(except where installed by Dyson).
• Repairs or alterations carried out other than in accordance with instructions by Dyson.
• Damage from external sources such as transit, weather, electrical outages or power surges.
• Normal wear and tear (e.g. fuse).
• Damage caused by cleaning which is not in line with the instructions in this manual: for example, cleaning with
chemicals or products listed as harmful to the unit.
• Damage caused by water ingress due to cleaning or treatment prohibited in this manual.
Dyson shall not be liable for any electrical, flooding or structural damage or any loss of business or revenue which
occurs as a result of a product failure.
If you are in any doubt as to what is covered by your warranty, please contact Dyson (details on the back cover).
ABOUT YOUR PRIVACY
• Your information will be held by Dyson Limited and its agents for promotional, marketing and servicing purposes.
• If your details change, if you change your mind about any of your marketing preferences or if you have any queries
about how we use your information, please contact Dyson Limited.
• For more information on how we protect your privacy, please see our privacy policy on the Dyson website.
CA
LOOKING AFTER YOUR HAND DRYER
HOW TO USE
Place your hands beneath the Dyson hand dryer and it will start automatically, creating sheets of air to scrape water
from your hands.
For best dry time results:
1. Keep your hands flat and parallel to the machine surface approximately 5mm from the blade, drawing your hands
through the airflow from your wrists to finger tips.
2. Move your hands slowly through the airflow keeping a consistent speed, approx. 2.5 seconds per side alternating
between front and back each time.
3. Keep your hands flat, close the gaps between your fingers and keep your thumbs in to ensure that the whole of your
hand is drawn through the airflow.
TROUBLESHOOTING GUIDE
WARNING: RISK OF ELECTRIC SHOCK.
Problem Solution
The hand dryer fails to start. Check fuse/circuit breaker is working and that the power supply is connected. Must be
performed by
a qualified electrician.
If a safe method of switching is available, turn the
unit on and off. If a safe method is not available,
a qualified electrician must perform this task.
The hand dryer sometimes cuts out when in use but
resumes operation after a period of time.
Check the air inlets are clean and free of dust. If the air inlets are dusty or dirty simply
remove the dust or debris with a soft cloth.
The dry time of the hand dryer has increased. Inspect the air inlets for dust and remove.
The air flow from the hand dryer is running hotter than
usual.
Inspect filters and change if required.
If you have any further questions please contact the Dyson Helpline.
CLEANING
The hand dryer should be cleaned daily.
Follow these 3 simple steps to ensure the unit performs to its best and remains hygienic.
Using the wrong cleaning method or product may invalidate your warranty.
1. Wipe all surfaces with a soft cloth and non-abrasive cleaning products.
2. Clean the air inlets on the sides REGULARLY.
3. Clean the floor and wall beneath and around the unit. This may be required more regularly in high use areas.
GENERAL ADVICE
Contains silver ion antibacterial technology to preserve the surface and can help prevent degradation caused by the
growth of bacteria.
All cleaning chemicals should be used exactly as indicated by the manufacturer’s instructions (including appropriate
dilution).
If a cleaning product is left on the machine for too long, a film will form.
This may reduce the effectiveness of the anti-bacterial surfaces.
Any chemicals intended for use should first be tested on an inconspicuous area to confirm suitability.
Aside from cleaning chemicals, care should be taken to avoid any harmful fluids from coming into contact with the
product, in particular oils and alcohol-based products.
CHEMICAL GUIDELINES
Many professional cleaning chemicals can be used. The following are some that are harmful to the unit and should not
be used. Use of these will invalidate your warranty.
Do not use:
Alcohol-acid mixes
Alcohol
Solvent /oil-based products
Quaternary ammonium
Alkali-bleach mixes
Foaming ingredients
Bleach or abrasive cleaners
Do not pressure wash
WATER GUIDELINES
This hand dryer has an IP24 certification.
Use of pressure washers can force water inside the casing. Water damage caused by incorrect cleaning will invalidate
your warranty.
Loading ...
Loading ...
Loading ...