Loading ...
Loading ...
Loading ...
7
POSITION OF THE HOB
NOTE: This appliance is to be built into a kitchen unit or 600mm worktop, providing the
following minimum distances are allowed.
The edges of the hob must be a
minimum distance of 60mm
from a side or rear wall.
700mm between the highest
point of the hob surface
(including the burners) and the
underside of the horizontal
surface directly above it.
400mm between the hob
surface and any unit above,
provided that the underside of
the horizontal surface is in line
with the outer edge of the hob.
If the underside of the
horizontal surface is closer than
400mm to the highest point of
the hob, it must be at least
50mm away from its outer
edges.
50mm clearance around the
appliance and between the hob
surface and any combustible
materials.
You must have a gap of at least 25mm and at most 75mm
between the bottom of the appliance and any surface below it.
Loading ...
Loading ...
Loading ...