Loading ...
Loading ...
Loading ...
10
HOW TO USE
The following symbols appear on the control panel next to each knob:
Black Circle
Gas Off
Large Flame
Maximum Setting
Small Flame
Minimum Setting
The symbol on the control panel next to the knob will indicate which burner it operates.
• The appliance is fitted with a flame failure safety device on each
burner, which is designed to stop the flow of gas to the burner head
in the event of the flame going out.
• To ignite a burner:
1. Press in the control dial of the burner that you wish to light
and turn it anti-clockwise to the maximum position.
2. If you keep the control dial depressed, the automatic ignition
for the burner will operate.
3. You should hold down the control knob for 15 seconds after
the flame on the burner has lit.
4. If after 15 seconds the burner has not lit, stop operating the
device and wait at least 1 min before attempting a further
ignition of the appliance.
5. After this 15-second interval, to regulate the flame you should
continue turning the control dial anti-clockwise until the flame
is at a suitable level.
• The operating position MUST be at a position between the
maximum and minimum position.
• To switch the burner off, turn the control dial fully clockwise to the
gas off position.
• In case of power failure, the burners can be lit by carefully using a
match.
IQGH604B / IQGH604W
IQGH603S
Loading ...
Loading ...
Loading ...