Wet Sounds SYN-DX-4 Owner’s Manual

Loading ...

1. Channel 3-4 Input Switch – Adjusting this switch to 2 channel input and

connecting only the CH 1/2 inputs allows the amplier to have 4 channel output.

2. Channel 5-6 Input Switch – Adjusting this switch turns on/off the RCA inputs for

channels 5 & 6.

3. Gain Control 1-2 - This is the input sensitivity gain control for channels 1 & 2.

4. Crossover Switch 1-2 - The HPF attenuates low frequencies and is used with

mid-range speakers and tweeters. LPF attenuates high frequencies and is used for

subwoofers. This controls channels 1 & 2

5. Variable Crossover 1-2 – Built in 12db crossover with frequencies between 50Hz

– 250Hz.

6. Gain Control 3-4 – This is the input sensitivity gain control for channels 3 & 4.

7. Crossover Switch 3-4 - The HPF attenuates low frequencies and is used with

mid-range speakers and tweeters. LPF attenuates high frequencies and is used for

subwoofers. This controls channels 3 & 4.

8. Variable Crossover 3-4 – Built in 12db crossover with frequencies between 50Hz

– 250Hz.

9. Gain Control 5-6 – This is the input sensitivity gain control for channels 5 & 6.

10. Crossover Switch 5-6 - The HPF attenuates low frequencies and is used with

mid-range speakers and tweeters. LPF attenuates high frequencies and is used for

subwoofers. This controls channels 5 & 6.

11. Variable Crossover 5-6 – Built in 12db crossover with frequencies between

50Hz – 250Hz.

12. Power LED Indicator and Logo

AMP DIAGRAM WITH LEGEND

Wet Sounds SYN-DX Series Owner’s Manual

1 2 3 4 5 6 7 8 9 10 11 12

Loading ...

Wet Sounds SYN-DX-4 Series 4 Ch. Marine Amplifier