Wet Sounds SYN-DX-4 Owner’s Manual

Loading ...

When connecting two speakers in bridged mode on channels 1-4 on the SYN-

DX-4, the left and right RCA’s must be split to retain stereo separation. This

means you will have left audio out of the CH 1-2 and right audio out of the CH

3-4. You must also switch to FROM CH 3-4 on the input mode section of the

control panel on top of the amplier (example shown below). If you choose not

to congure using this method and just select FROM CH 1-2, then both speakers

will play in mono and not stereo.

Two dual male RCA Y-Splitters are

required for this conguration.

Please contact Wet Sounds Technical Support at 877.938.7757 if you need

any assistance or how to bridge your SYN-DX Series Amplier.

Wet Sounds SYN-DX Series Owner’s Manual

BRIDGED AUDIO RCA CONFIGURATION

SYN-DX 4 Connection Panel

SYN-DX 4 SYN-DX 6

Loading ...

Wet Sounds SYN-DX-4 Series 4 Ch. Marine Amplifier