User Manual - Page 13

To mount your camera on a wall or ceiling, please follow the steps below. It is recommended that you congure the camera before mounting.

Step 1

Hold the base of the camera with one hand placing your thumb on the tab, then press down on the release

buttons with your other hand and pull the camera from the camera base.

Step 3

Depending on the material of the wall or ceiling, use proper tools to drill two holes 25 mm deep with a

6 mm drill bit where you marked. If the wall is made out of concrete, drill the holes rst, then insert the plastic

anchors to support the screws.

Step 2

Place the camera base where you want to position the camera and use a pencil to mark the holes. Make sure