Loading ...
2
INSTALLATION SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
Installation of this cooktop must conform with
local codes, or in the absence of local codes,
with the National Fuel Gas Code, ANSI
Z223.1/NFPA.54, latest edition. In Canada,
installation must conform with the current
Natural Gas Installation Code, CAN/
CGAB149.1 or the current Propane Installation
Code, CAN/CGA-B149.2, and with local codes
where applicable. This cooktop has been
design-certified by CSA International according
to ANSI Z21.1, latest edition and Canadian
Gas Association according to
CAN/CGA-1.1 latest edition.
As with any appliance using gas and
generating heat, there are certain safety
precautions you should follow. You will find
these precautions in the lmportant Safety
Information section in your User’s Guide. Read
them carefully.
•
IMPORTANT
– Save these instructions
for local electrical inspector’s use.
•
IMPORTANT
– Observe all governing
codes and ordinances.
Note to Installer: Leave these instructions
with the appliance after installation is
completed.
Note to Consumer: Keep the User’s Guide
and Installation Instructions for future
reference.
NOTE: This appliance must be properly
grounded.
•
The electrical diagram is in an envelope
attached to the back of the cooktop.
•
Skill level – Installation of this appliance
requires basic mechanical skills.
•
Proper installation is the responsibility of the
installer.
•
Product failure due to improper installation is
not covered under the Warranty.
•
Remove all tape and packaging.
•
Make sure the burners are properly seated
and level.
•
Take the accessory pack off of the cooktop
•
Check to be sure that no cooktop parts have
come loose during shipping.
Loading ...
Loading ...
Loading ...