Signature UPCG3054ST 30-inch Gas Cooktop

User Manual - Page 10

For UPCG3054ST.

PDF File Manual, 32 pages, Read Online | Download pdf file

UPCG3054ST photo
Loading ...
Loading ...
Loading ...
10
ELECTRICAL REQUIREMENTS
120 Volt, 60 Hertz, properly grounded dedicated
circuit protected by a 15 A or 20 A circuit breaker
or time delay fuse.
GROUNDING
IMPORTANT: FOR PERSONAL
SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
PREFERRED
METHOD
Ensure proper ground
exists before use
The power cord of this appliance should be
equipped with a three-prong (grounding) plug
which mates with a standard three-prong
grounding wall receptacle to reduce the
possibility of electric shock hazard from this
appliance.
The customer should have the wall receptacle
and circuit checked by a qualified technician to
be sure the receptacle is properly grounded.
When connecting the cord of this cooktop to a
standard two-prong wall receptacle, it is the
personal responsibility and obligation of the
customer to have it replaced with a properly
grounded three-prong wall receptacle.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT
OR REMOVE THE THIRD (GROUND) PRONG
FROM THE POWER CORD.
A word about GFCIs (Ground Fault Circuit
Interrupters)—GFCIs are not required or
recommended for gas range receptacles.
GFCIs are devices that sense leakage of current
in a circuit and automatically switch off power
when a threshold leakage level is detected.
These devices must be manually reset by the
customer.
The National Electrical Code requires the use of
GFCIs in kitchen receptacles installed to serve
countertop surfaces. Performance of the cooktop
will not be affected if it is operated from a circuit
protected by a GFCI, but the occasional resets
required can be a nuisance.
3. ELECTRICAL CONNECTIONS
INSTALLATION INSTRUCTIONS
Loading ...
Loading ...
Loading ...