Loading ...
Loading ...
Loading ...
12
CAUTION
DO NOT operate the burners without all parts
in place.
Place the burner caps and heads on the cooktop.
Make sure that the caps and heads are placed in
the correct locations.
Small burner
head and cap
Lrage burner
head and cap
Medium burner
head and cap
Extra large burner
(Center) head and cap
Make sure the hole in the burner head is
positioned over the electrode.
Hole
Electrode
5. ASSEMBLE THE SURFACE BURNERS
INSTALLATION INSTRUCTIONS
Operation of all cooktop burners should be
checked after the COOKTOP and gas supply
lines have been carefully checked for leaks.
ELECTRIC IGNITION
Select a top burner knob, push down and then
turn counterclockwise to the LITE position.
A clicking sound indicates proper operation of the
spark module.
Once the air has been purged from the supply
lines, burner should ignite within 4 seconds.
After burner ignites, rotate knob out of the LITE
position. Try each burner in succession until all
burners have been checked.
ELECTRIC IGNITION
The combustion quality of burner flames needs
to be confirmed visually.
A Yellow flames — Call for service
B Yellow tips on outer cones
— This is normal for LP gas
C Soft blue flames
— This is normal for natural gas
If burner flames look like A, call for service.
Normal burner flames look like B or C, depending
on the type of gas used.
With LP gas, some yellow tipping on outer cones
is normal.
6. CHECK IGNITION OF SURFACE BURNERS
Loading ...
Loading ...
Loading ...