Loading ...
Loading ...
Loading ...
Getting the most from your appliance
2. Push the door release button to open the door.
3. Fill the detergent, water softener and rinsing aid to
the dishwasher.
4. Draw out the lower and upper basket. Load the
dishes on the dish rack and cutlery inside the cutlery
basket. Make sure that the rotating spray arm can turn
freely all the way round. If necessary remove any
obstacles.
5. Close the door firmly. Open the water supply.
6.
7. The dishwasher is designed to stop if the door is
opened accidentally during operation.
8. The dishwasher stops automatically at the end of
the program. You will hear 8 sec. buzzer sound. The
power pilot light will remain illuminated until the
power is switched off.
9. After washing, dishes should be allowed to cool
down for about 15 minutes as they are hot to handle.
Dishes will cool quicker if the door is opened slightly.
10. Empty the lower basket first and then the upper
one. This will avoid water dripping from the upper
basket onto the dishes in the lower one.
11. After unloading the dishes, remove and clean the
filter and return to its position.
Note: This is normal when you noted small amount of
water being pumped-out from the drain hose prior
to the start of a wash cycle. This is because the pump
retains a small amount of water from the previous
cycle.
Press the ON/OFF button, and the ON/OFF light
will turn on. Turn the program selector to select a
desired wash cycle, press the Start/ button , the
machine will work after 10 seconds.
To operate the dishwasher:
Program Selection Change
Note: If you open the door during the washing cycle,
the machine will pause. When you close the door, the
machine will resume operation after 10 seconds.
The Display window shows the state of the
dishwasher:
a) Colour icon in the LED display is on but not blinking
----stand by or pause
b) Colo icon in the LED display blinking----Running
Delay function
After selecting the wash cycle program, you can set the
desired delay start time by pressing the delay button. You
can select 1-24h from the program. The dishwasher will
start operation after the selected delay time is elapsed.
Pause
ur
Functions Simple everyday use
Using your dishwasher
19
Press the Start/Pause button, the dishwasher will be
paused, then press the Program button more than
3 seconds to cancel the current program , you can
change the program to the desired cycle setting
Example : Set normal program with 4 hours delay
setting.
Setting steps
Fill the detergent and salt if necessary
Put the dishes in and close the door
Press On/Off button once
Continue to press program button until the indicator
light for icon illuminates.
Continue to press delay button until it displays H:04
Press start/pause button once to start.
You can modify the washing program at any
time. Please check the detergent dispenser. If it is
opened, refill with the detergent before start the
new program.
1. Make sure the water inlet and drain hoses are
correctly and securely connected.
Child lock function
Lock : In standby state, press Half load and Child
lock buttons for 3 seconds, there will be a “beep”
denoting entering the child-lock state and the
child lock indicator will illuminate.
Unlock : in locked state, press Half load and Child
lock buttons for 3 seconds, there will be a “beep”
denoting that the lock is released and the child
lock indicator will go off.
Loading ...
Loading ...
Loading ...