Loading ...
Loading ...
Loading ...
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on
Any electrical work that is required to install this
appliance MUST be carried out by a qualified
electrician.
Warning: THIS APPLIANCE MUST BE EARTHED
Before making any electrical connections, ensure
that:
Electrical safety is only guaranteed when the earth
system of your house is in accordance with the related
local regulations.
Do not bend, stretch or pull the supply cable to
avoid electric shock.
Ensure the power socket is suitable for the
maximum power of the appliance (fuses in the power
circuit must be 13 amp).
The supply voltage should be the same as that
indicated in the technical specifications and the
appliance rating plate.
The appliance should be earthed and in compliance
with the applicable law.
When installed, the power socket must be within
easy reach.
If the socket outlets in your home are not suitable
for the plug supplied with this unit check with a
qualified electrician for replacement.
The use of adapters, multiple connectors or
extension cables are not recommended.
The appliance must be connected to a 220-240
volt 50Hz AC supply by means of a three pin socket,
suitably earthed and protected by a 13 amp fuse.
Should the fuse need to be replaced, a 13 amp fuse
approved to BS1362 must be used.
The plug contains a removable fuse cover that must
be refitted when the fuse is replaced. If the fuse cover
is lost or damaged, the plug must not be used until a
replacement cover has been fitted or the plug is
replaced.
A damaged plug should be cut off as close to the
plug body as possible, the fuse should be removed
and the plug disposed of safely.
Plug replacement (UK & Ireland only)
Should you need to replace the plug; the wires in the power
cable are coloured in the following way:
Blue - Neutral 'N'
Brown - Live 'L'
Green & Yellow - Earth 'E'
As the colours of the wires in the power cable may not
correspond with the coloured markings identifying the
terminals in your plug, and proceed as follows:
The green & yellow wire must be connected to the terminal
in the plug that is marked with the letter E or by the earth
symbol.
The blue wire must be connected to the terminal that is
marked with the letter N.
The brown wire must be connected to the
terminal that is marked with the letter L.
If power supply cord is damaged, it must replaced by the
manufacturer or its service agent or a similar qualified
person in order to avoid a hazard.
Installing your dishwasher
Bringing it all together
0345 257 7271.
16
Installing your
dishwasher
Loading ...
Loading ...
Loading ...