Loading ...
Loading ...
Loading ...
Delivery and Installation Tips
Anchoring
• Cybex requires that each foot has at least one anchor bolted to the floor.
• All anchors must have a minimum embedment into concrete, regardless of wood/tile/rubber/screed over
sub-floor.
• Dynamic anchors must have a minimum embedment depth in concrete to ensure maximum security and pull
out force. See Anchor Selection for embedment depth minimums.
Building Codes
• It is the facility’s responsibility to adhere to local and regional building codes. Please verify with the customer
to ensure that they are aware of this.
Carpeting
• If bolted down to carpet flooring, be sure to use a box cutter knife to cut the carpet threads around each foot.
This will help avoid the carpet threads from being wrapped around and pulled by the drill bit.
Competitor Product
• The bolt down guidelines and procedures for Cybex products were determined by the company’s Engineering
and Installation Development groups. These guidelines include which anchors to use and positioning of the
anchors are required for Cybex product.
1. Cybex does not have that level of specification or engineering input for competitive product.
2. Cybex installation teams are not permitted to anchor competitor equipment.
Drilling
• It is also recommended to drill an additional 1/2” (12.7mm) of depth beyond the length of the fastener being
used to ensure that debris does not block the entry of the anchor.
1. This can be done by marking your drill bit with a piece of tape.
2. While it is recommended that a vacuum be used to clean up debris, this will not account for all the debris
that will settle at the bottom of the drilled hole.
Anchor Selection
Static Anchor
Subfloor between unit and
concrete over 1/2” (12.7mm) thick
Subfloor between unit and
concrete 0” to 1/2” (12.7mm) thick
Anchor
Imperial: KH-EZ 3/8” x 5”Imperial: KH-EZ 3/8” x 4”
Metric: HUS-H 8mm x 150mmMetric: HUS-H 8mm x 120mm
• Minimum concrete compressive strength: 3000psi (20 N/mm2)
• Minimum concrete thickness:
KH-EZ 3/8”: 4-7/8” (124mm)•
• HUS-H 8mm: 120mm (4-3/4”)
Page 50 of 54
Loading ...
Loading ...
Loading ...