Loading ...
Loading ...
Loading ...
Safety
Safety Information
It is the sole responsibility of the purchaser of CYBEX INTERNATIONAL INC. products to read the owner’s manual
and warning labels and instruct all individuals, whether they are the end user or supervising personnel, on proper
usage of the equipment.
UNDERSTANDING EACH AND EVERY WARNING TO THE FULLEST IS IMPORTANT. IF ANY OF THESE WARNINGS ARE
UNCLEAR, CONTACT CYBEX INTERNATIONAL INC. CUSTOMER SERVICE IMMEDIATELY AT 1-800-351-3737.
This equipment is categorized as class S per EN ISO 20957-1. As such this equipment is only intended for commercial,
institutional and/or studio facilities. It is not intended for home use. Contact CYBEX INTERNATIONAL INC. with any
questions regarding this classification.
It is recommended that all users of CYBEX INTERNATIONAL INC. exercise equipment be informed of the following
information prior to use.
Access Control
CYBEX INTERNATIONAL INC. recommends that all commercial fitness equipment be used in a supervised area. It
is recommended that the equipment be located in an access controlled area. Control is the responsibility of the
facility owner.
Installation
SECURING EQUIPMENT - CYBEX INTERNATIONAL INC. requires that all equipment be secured to a solid, level
surface to stabilize it and eliminate rocking or tipping over. This must be performed by a licensed contractor. See
Bolt to Floor Guidelines for installation procedure.
Proper Usage
• Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative
that CYBEX INTERNATIONAL INC. equipment is used properly to avoid injury.
• Injuries may result if exercising improperly or excessively. It is recommended that all individuals consult a
physician prior to commencing an exercise program. If at any time during exercise you feel faint, dizzy or
experience pain, STOP EXERCISING and consult your physician.
• Keep body parts (hands, feet, hair, etc.), clothing and jewelry away from moving parts to avoid injury.
• When adjusting any seat, knee hold down pad, range of motion limiter, foothold pad, pulley or any other type
of adjuster, make certain that the adjusting pin is fully engaged in the hole to avoid injury.
Inspection
• DO NOT use or permit use of any equipment that is damaged and/or has worn or broken parts. For all CYBEX
INTERNATIONAL INC. equipment use only replacement parts supplied by CYBEX INTERNATIONAL INC..
• Cables and belts pose an extreme liability if used when frayed. Always replace any cable at first sign of wear
(consult CYBEX INTERNATIONAL INC. if uncertain).
• Routinely inspect all accessory clips that join attachments to the cables and replace them at the first sign of
wear.
• MAINTAIN LABELS AND NAME PLATES - Do not remove labels for any reason. They contain important information.
If unreadable or missing, contact CYBEX INTERNATIONAL INC. for a replacement.
• EQUIPMENT MAINTENANCE - Preventative maintenance is the key to smooth operating equipment as well as
to keep your liability to a minimum. Equipment needs to be inspected at regular intervals.
Page 4 of 54
Loading ...
Loading ...
Loading ...