Loading ...
Loading ...
Loading ...
Carriage Adjustment Guide
Tools Required:
• 7 mm Allen wrench
• 17 mm Open end wrench
1. While tightening the nut and bolt, apply downward pressure to each side of the rear roller so it travels down
the slotted bolt holes, moving the roller closer to the adjustment tube.
QtyDescription
1Rear roller1
1Adjustment tube2
2. Tighten to 25-30 FT-LBS (27.1- 33.9Nm).
3. Ensure carriage adjustment pin (1) is fully engaged before use.
Incorrect: Adjustment pin not fully engaged.Correct: Adjustment pin fully engaged.
Page 33 of 54
Loading ...
Loading ...
Loading ...