Loading ...
Loading ...
Loading ...
Frequently Asked Questions
67
Problem Possible cause and solution
White residue is visible
on dishes and cutlery,
clouding occurs on
glassware; this film can
be wiped off.
The rinse aid dosage is too low.
Increase the dosage (see “Before using for the first
time, Rinse aid”).
The salt reservoir is empty.
Fill the salt reservoir (see “Before using for the first
time, Dishwasher salt”).
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
An unsuitable Tab detergent has been used.
Change your detergent.
The softener assembly is programmed too low for the
water hardness level.
Program the softener assembly for harder water
(see “Before using for the first time, Softener as-
sembly”).
There are rust stains on
the cutlery.
The affected items are not corrosion resistant.
There is no remedy.
Purchase cutlery which is dishwasher-safe.
A program was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.
Always run the QuickIntenseWash program with
the Short programming option selected and with-
out any dishes in the dishwasher after adding
dishwasher salt.
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
Loading ...
Loading ...
Loading ...