Loading ...
Loading ...
Loading ...
Options
47
Delay Start
You can set the start time for a pro-
gram, e.g., to take advantage of night
time electricity rates. The start time can
be delayed between 30 minutes and 24
hours.
The delay period is shown in 30 min-
utes increments for a delay period be-
tween 30 minutes and 9 hours 30 min-
utes. It is shown in hours for periods
longer than this.
When using the Delay Start function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet, pow-
der detergent can become lumpy
and stick to the dispenser, with the
result that it is not fully dispensed.
Do not use liquid detergent when se-
lecting Delay Start, as it can run into
the dishwasher before it is required.
Open the door.
Turn the dishwasher on with the
button.
Select the desired program.
Press the button.
The last delay start time used will ap-
pear in the time display. The indica-
tor light will light up.
Set the required delay start time us-
ing the button.
If you keep the button pressed, the
time will increase automatically up to
hours. To get back to .hours,
press the button twice.
Close the door within four seconds.
If you do not close the door within
four seconds, the indicator light of
the selected program and the time
display will flash.
The program cannot be started until
you press the program selection but-
ton and close the door within four
seconds.
Loading ...
Loading ...
Loading ...