Loading ...
Loading ...
Loading ...
Before using for the first time
28
Rinse aid indicator
When the Rinse Aid indicator lights up,
the rinse aid reservoir contains suffi-
cient rinse aid for 2-3 programs only.
Add rinse aid.
If you only ever use combination prod-
ucts in your dishwasher, you can
switch both refill indicators for salt and
rinse aid off if you wish (see “Options -
Refill indicators”).
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage is set in stages
from 0 to 6. It is set to 3 at the factory.
This is the recommended setting.
If spots appear on dishware and glass-
ware:
Increase the rinse aid dosage.
If clouding or smearing appears on
dishware and glassware:
Decrease the rinse aid dosage.
Turn the dishwasher off with the
button, if it is turned on.
Press the program selection button
, and, simultaneously switch the
dishwasher on using the button.
Keep the program selection button
pressed in for at least four seconds
until the lower right program indicator
light comes on.
If this does not happen, start the proce-
dure from the beginning again.
Press the Short button three times.
The Short indicator will flash 3 times at
short intervals.
The set value will appear in the display
after .
The flashing sequence will appear in
the display.
This indicates a factory default setting
of 3.
Use the program selection button
to select the setting required.
Each press of the button moves you
up a stage.
The setting is now saved.
Turn the dishwasher off with the
button.
Loading ...
Loading ...
Loading ...