Loading ...
Loading ...
Loading ...
Options
48
Open the door if you need to check
how long the delay period has left to
run.
The time up until the program starts will
count down in the display in hours for
durations above 10 hours, and in min-
utes for durations below 10 hours.
When the set time is reached, the pro-
gram selected will start automatically.
The time remaining will appear in the
time display and the indicator light
will go out.
How the Delay Start time is shown in
the display:
up to 59 minutes:
e.g., 30 minutes = .
1 hour up to 9 hours 30 minutes:
e.g., 5 hours = .
over 10 hours:
e.g., 15 hours =
If you open the door during the delay
start time, you must then press the
program selection button and close
the door within four seconds in order
to continue the delay start time.
Starting a program before the delay
start time has elapsed:
A program can be started before the
delay start period has elapsed.
Proceed as follows:
Open the door.
Turn the dishwasher off with the
button.
Turn the dishwasher on again with the
button.
Select the program you want.
Start the program by closing the door
within four seconds.
The Optical Interface comes on to show
that a program has been started.
If you do not close the door within
four seconds, the indicator light of
the selected program and the time
display will flash.
The program cannot be started until
you press the program selection but-
ton and close the door within four
seconds.
Loading ...
Loading ...
Loading ...