Loading ...
Loading ...
Loading ...
Options
51
Factory default settings
If you have altered any settings from the
factory default, you can reset them
back to the factory default settings as
follows:
Open the door.
Turn the dishwasher off with the
button, if it is turned on.
Press the program selection button
, and, simultaneously switch the
dishwasher on using the button.
Keep the program selection button
pressed in for at least four seconds
until the lower right program indicator
light comes on.
If this does not happen, start the proce-
dure from the beginning again.
Press the Short button 19 times.
The Short indicator light will flash once
at a long interval and then 9 times at
short intervals.
The flashing sequence in the display in-
dicates whether a setting has been
changed from its factory default.
– : All settings are set to factory de-
fault settings
– : At least one setting has been
changed
To reset the dishwasher to the factory
default settings, press the program
selection button .
The setting is now stored in memory.
Turn the dishwasher off with the
button.
Loading ...
Loading ...
Loading ...