Loading ...
Loading ...
Loading ...
71
Chapter 4
Configure the Router in Standard Router Mode
• Destination Network - The Destination Network is the address of the network
or host that you want to assign to a static route.
• Subnet Mask - The Subnet Mask determines which portion of an IP Address is
the network portion, and which portion is the host portion.
• Default Gateway - This is the IP Address of the default gateway device that
allows the contact between the router and the network or host.
2. Select Enabled or Disabled for this entry on the Status drop-down list.
3. Click Save.
You can also do the following operations to modify the current settings.
• Click Delete to delete the entry.
• Click Enable All to enable all the entries.
• Click Disable All to disable all the entries.
• Click Delete All to delete all the entries.
• Click Previous to view the information on the previous screen and Next to view the
information on the next screen.
4. 10. 2. System Routing Table
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced > Advanced Routing > System Routing Table, and you can view all
the valid route entries in use.
Loading ...
Loading ...
Loading ...