Loading ...
Loading ...
Loading ...
35
Tighten the clamping
screw until the clamping
tab is fully seated against
the wire compartment.
Complete the rest
of the installation
observing local codes
(see Steps 9 and 10).
When complete reinstall
the wire compartment cover.
Step 8
Installing the Cooktop
Remove grease jar(s) from beneath cooktop
to avoid breakage. Remove vent grille from
cooktop’s surface. Using 2 people, position
cooktop over countertop opening, with power
cable inserted through the opening.
Holding cooktop by
side edges, lower it
into countertop opening.
Replace jar(s) and vent
grille.
To order optional installation brackets/thumb
screws, call the National Parts Center at
800.626.2002.
Order two of each part: WB02X11331 Bracket
WB01X10353 Screw
To install optional installation brackets:
Remove 2 screws on both sides under cooktop.
Align optional installation bracket under cooktop
and reinstall screws through the slot in the
bracket. Do this on both sides of the cooktop.
Thread the thumb screw through the hole in
the bracket and tighten to secure the cooktop
to the countertop. Repeat on the other side.
IMPORTANT: Turn thumb screw until it touches
the bottom of the countertop. Do not overtighten.
Step 7
Install 1/2″ Flexible Conduit with Supplied
Clamp
NOTE: A clamp
has been included
with the cooktop for
installing the 1/2″
flexible conduit.
Remove the screws
holding the wire
compartment cover
and remove the cover.
Remove the clamping screw
and the clamp.
Feed the power
supply leads
through the
conduit; be sure
to leave enough
length to properly
connect these leads
to the cooktop
power leads.
Thread the leads
through an anti-short bushing and firmly seat
the bushing in the end of the conduit.
Feed the leads
through the hole in
the wire compartment.
Lay the conduit against
the side of the wire
compartment.
Place the clamp
over the conduit.
Make sure the
bushing is fully
seated against the
stop tab in the
clamp.
Clamp
Stop Tab
Clamping
Screw
Clamping
Tab
Power Supply
Leads
Bushing (Fully Seated)
Anti-Short
Bushing
Conduit
Clamping
Screw
Clamping
Tab
(continued next page)
Optional installation
bracket and thumb
screw (not included)
Cooktop
Countertop
Screws supplied with cooktop
Thumb screw
Clamp
Stop Tab
Clamping
Tab
Loading ...
Loading ...
Loading ...