Loading ...
Loading ...
Loading ...
Incidents Causes Remedies
Pump does not start
• NO mains supply
• Floater does not switch
• Check main supply
• Bring oater in a higher
position
NO ow
• Inlet sieve is clogged
• Pressure hose in bent
• Clean inlet sieve water jet
• Reset hose
Pump does not
switch o
• Floater cannot sink down
• Place pump properly on
shaft ground
• Inlet sieve is clogged
• Reduced pumping
capacity by dirty and
aberasive water
• Clean inlet sieve
• Clean pump and replace
worn-out parts
Insucient ow
Pump switches o
after short operation
period
• Thermal cutout stops
pumps due to dirty water
• water too hot, thermal-
cutout stops pumping
• Remove mains plug, clean
pump and shaft
• Make sure that a water
temperature of max. 35°C
(95°F) is not exceed
www.SereneLifeHome.com
7
TROUBLESHOOTING
SLBSMPMP50.9 SLBSMPMP100
Power Supply
Qmax
H.Max
Product Dimension
(L x W x H)
400W (0.5HP) 750W (1HP)
1,980 gallon/
H (7,500L/H）
3,302 gallon/
H (12,500L/H）
16.40ft. (5 Meters) 26.25ft. (8 Meters)
6.2’’ X 6.1’’ 12.4’’
–inches
6.2'' x 6.1'' x 13.4''
-inches
SLBSMPMP50
400W (0.5HP)
1,980 gallon/
H (7,500L/H）
16.40ft. (5 Meters)
6.2’’ X 6.1’’ 12.4’’
–inches
MODEL
Loading ...
Loading ...