Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
6
Remove the mains plug before all maintenance work.
• When the pump is often transported in the course of operation, it should be
cleaned outwith clear water after every use.
• In case of stationary installation, the function of the bating switch should be
checked every3 months.
• All brous particles which may have built-up inside the pump housing should be
removed with a water jet.
• Every 3 months the shaft ground and as should be cleaned from mud.
• Remove deposits on the oater with clear water.
CLEANING THE IMPELLER
If excessive deposits collect in the pump case you must dismantle the bottom
part of the pump as follows:
1. Remove the intake cage from the pump case.
2. Clean the impeller with clear water.
Important! Do not put down or rest the pump on the impeller!
3. Re-assemble in reverse order.
SERVICE DEPARTMENT
•
Damaged switches must be replaced by our after-sales service department.
• If the connecting cable (or mains plug) is damaged, it must be replaced by a
particular connecting cable which is available from our service department.
Replacement of the connecting cable must only be carried out by our service
department (see last page) or by a qualied person (qualied electrician).
STORAGE
•
Thoroughly clean the whole machine and its accessories.
• Store it out of the reach of children, in a stable and secure position, in a cool and
dry place, avoid too high and too low temperatures.
• Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
• Don’t keep it in plastic bags to avoid humidity build-up.
ENVIRONMENT
Should your appliance need replacement after extended use, do not discard
it with the household rubbish but dispose of it in an environmentally safe
way. Waste produced by electrical machine items should not be handled like
normal household rubbish. Please recycle where recycle facilities exist.
Check with your Local Authority or retailer for recycling advice.
Loading ...
Loading ...
Loading ...