Loading ...
Loading ...
www.SereneLifeHome.com
2
GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings and
instructions may result in electric shock, re and/or serious injury. Save all warnings
and instructions for future reference. The term "power tool" in the warnings refers
to your mains operated (corded) power tool. Only qualied personnel should
install, operate and repair pump. Any wiring of pumps should be performed by a
qualied electrician.
BEFORE START-UP, NOTE THE FOLLOWING!
• The pump can be connectedto any shock-proof plug which has been installed
according to regulations. The plug must have a supply voltage of 220 V - 50Hz.
Fuse min. 6 Amp.
CAUTION!
When the pump is to be used near swimming pools or garden ponds and in their
area of protection, it must be equipped with a PRCD (residual current circuit breaker)
with a nominal trip current of max. 30 mA (according to VDE 0100, part 702 and 738).
The pump must not be operated while people are in the swimming pool or in the
garden pond! Please contact your electrician!
ATTENTION!
Before starting to run your new submersible pump, please have the following
items checked by an expert:
• Ground connection
• Zero conductor
• Fault current breaker switch must correspond the safety regulations of the power
plants and they must work faultlessly.
• The electrical connections must be protected from moisture.
• If there is danger of ooding, the electrical connections must be taken to higher
ground.
• Circulation of aggressive uids, as well as the circulation of abrasive materials
must be avoided at all costs.
• The submersible motor-driven pump must be protected from frost.
• The pump must be protected from running dry.
• Access on the part of children should also be prevented with appropriate measures.
Loading ...
Loading ...
Loading ...