Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
5
VENTING THE PUMP BEFORE USE
Always ensure that the pump is vented property before commissioning the pump.
Possibly tilting back and forth several times until no more air bubbles appear, wait
at least 15 seconds before the pump to start.
SETTING THE ON/OFF OPERATING POINT
The ON and OFF operating point of the oat switch can be set by adjusting
the oat switch in its latching holder. Before you put the pump into operation,
please check the following:
• The oat switch must be installed so that the levelof the ON operating point and
the level of the OFF operating point can be reached easily and with little force.
To check this, place the pump in a vessel lled with water, raise the oat switch
carefully by hand and then lower it again. As you do so, note whether the pump
switches on and o.
• Make sure that the distance between the oat switch head and the latching holder
is not too small. Proper operation is not guaranteed if the gap is too small.
• When you set the oat switch, make sure that it does not touch the base before
the pump switches o. Caution! Risk of dry-running.
This appliance cannot be used by children or people who are physically, mentally
or developmentally impaired, or people who lack experience or knowledge, except
in case these people receive instruction from a person responsible for their safety,
a supervisor, or by studying the preceding instructions concerning use of this
appliance.
CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the
power plug.
Never use solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
MAINTENANCE GUIDELINES
This submersible pump is an approved, maintenance-free high quality product,
which is subject to severe nal controls. We recommend regular inspection and
maintenance to ensure long equipment life and uninterrupted operation.
Loading ...
Loading ...
Loading ...