Loading ...
Loading ...
Loading ...
Securing the Extension Cord
1. For safe and ecient use of your snow thrower, use only a
UL-, CSA- or ETL- rated extension cord recommended for
outdoor use. Refer to the Extension Cord Chart on
page 2.
2. Form a loop with the extension cord and push the loop
through the slot on the extension cord restraint hook.
Position the loop over the hook and pull the cable back
through the slot (Fig. 8). Securing the extension cord in
this manner will prevent it from accidentally disconnecting
from the power supply during operation.
3. Insert the female end of the extension cord into the
appliance's polarized male plug (Fig. 9).
4. Note that the snow thrower has a polarized male plug –
one prong in the plug is slightly longer and wider than the
other (Fig. 10). The extension cord female end should be
likewise polarized so that the extension cord ts snugly
into the appliance plug.
PoweringOnandO
mWARNING! The auger starts rotating immediately
after the snow thrower is switched on. Keep hands
and feet away from the auger.
1. To switch the snow thrower ON, press the safety button,
then squeeze the switch bar lever (Fig. 11).
2. Once the snow thrower starts, release the safety button
and proceed with operation.
3. To power OFF, release the switch bar lever.
Fig. 8
Extension
cord restraint
hook
Extension cord
Fig. 9
Extension cord
Appliance cord
Fig. 10
m WARNING m
Damagedelectricalcordspresentriskofre,
electrical shock and serious bodily injury.
Before operating the snow thrower, carefully examine
the electrical cord. If the cord is damaged, do not use
the snow thrower. Replace or repair the damaged
cord immediately. If you need assistance, contact an
authorized Snow Joe
®
+ Sun Joe
®
dealer or call the
Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
Fig. 11
Press the
safety
button
Squeeze
the switch
bar lever
8
Loading ...
Loading ...
Loading ...